{"title":"iScooter chargers","description":"\u003ch2\u003eChargers for electric scooters iScooter\u003c\/h2\u003e\u003cp\u003eFind the Source’IT chargers adapted to the different configurations iScooter: lithium-ion batteries 36V, 48V and 52V. First choose your model, then the current proposed for its battery. Each plug presents the charger and a detailed photo of the original connector iScooter.\u003c\/p\u003e\u003ch2\u003eThree voltages, plugs adapted to each model\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e36V: standard charger 2A, output 42V and jack connector.\u003c\/li\u003e\n\u003cli\u003e48V: output 54,6V and connector GX16-3, with currents available depending on the battery capacity of the model.\u003c\/li\u003e\n\u003cli\u003eW12 52V: output 58,8V and connector M16 male, in 2A, 4A or 5A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe battery's rated voltage does not match its maximum charging voltage. Also check the shape of the connector, especially when a label of the scooter exists in several versions.\u003c\/p\u003e\u003ch2\u003eStandard, fast or ultra-fast charging\u003c\/h2\u003e\u003cp\u003e2A is suitable for daily charging. 4A and 5A reduce the estimated time on the models to which they are proposed. The sheets give estimates of the identified capabilities. 48V 5A chargers use a plastic housing; W12 52V 5A uses an aluminum housing.\u003c\/p\u003e\u003ch2\u003eActive ventilation Source’IT\u003c\/h2\u003e\u003cp\u003eThe fan removes the heat generated during the charging and limits its accumulation in the housing. Keep the openings clear to ensure the circulation of air and help preserve the components.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eHow do I choose my charger iScooter?\u003c\/h3\u003e\u003cp\u003eSelect your model collection, then check the battery voltage and compare your socket with the connector close-up on the plug.\u003c\/p\u003e\u003ch3\u003eAre the fast chargers suitable for all models?\u003c\/h3\u003e\u003cp\u003eAvailable powers are selected by configuration. See the chargers offered for your model rather than choosing only according to the shape of the socket.\u003c\/p\u003e\u003ch3\u003eCan I buy a second charger?\u003c\/h3\u003e\u003cp\u003eYes. The models presented can be used as replacement or second charger for the specified configuration.\u003c\/p\u003e\u003cp\u003eWarranty 2 years. Shipment within 24\/48 h from France. For a check, contact \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with a photo of the battery port and label.\u003c\/p\u003e\u003cp\u003eFind all \u003ca href=\"\/en-hu\/collections\/chargeurs-trottinette-electrique\"\u003echargers for electric scooters\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"chargeur-iscooter-i8-36v-42v-2a","title":"Standard charger iScooter i8 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i8 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i8 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 5,2 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i8, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 5,2 Ah : approximately 2 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i8\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i8\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i8-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 5,2 Ah : approximately 2 h 30.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i8\"\u003ecollection of chargers iScooter i8\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i8 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i8 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e5,2 Ah: about 2 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885173760266,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i8-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i8m-36v-42v-2a","title":"Standard charger iScooter i8M 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i8M – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i8M delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 5,2 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i8M, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 5,2 Ah : approximately 2 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i8M\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i8M\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i8m-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 5,2 Ah : approximately 2 h 30.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i8m\"\u003ecollection of chargers iScooter i8M\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i8M 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i8M equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e5,2 Ah: about 2 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885174120714,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i8m-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i8l-36v-42v-2a","title":"Standard charger iScooter i8L 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i8L – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i8L delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 7,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i8L, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 7,5 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i8L\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i8L\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i8l-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 7,5 Ah : approximately 3 h 45.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i8l\"\u003ecollection of chargers iScooter i8L\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i8L 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i8L equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e7,5 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885174481162,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i8l-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i9-36v-42v-2a","title":"Standard charger iScooter i9 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i9 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i9 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 7,5 or 7,8 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i9, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 7,5 Ah : approximately 3 h 45 ; 7,8 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i9\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i9\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i9-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 7,5 Ah : approximately 3 h 45 ; 7,8 Ah : approximately 3 h 45.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i9\"\u003ecollection of chargers iScooter i9\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i9 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i9 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e7,5 Ah: about 3 h 45; 7,8 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885174841610,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i9-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i9-pro-36v-42v-2a","title":"Standard charger iScooter i9 Pro 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i9 Pro – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i9 Pro delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 7,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i9 Pro, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 7,5 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter i9 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter i9 Pro\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i9-pro-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 7,5 Ah : approximately 3 h 45.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i9-pro\"\u003ecollection of chargers iScooter i9 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i9 Pro 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i9 Pro equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e7,5 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885175070986,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i9-pro-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i9m-36v-42v-2a","title":"Standard charger iScooter i9M 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i9M – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i9M delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 7,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i9M, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 7,5 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i9M\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i9M\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i9m-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 7,5 Ah : approximately 3 h 45.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i9m\"\u003ecollection of chargers iScooter i9M\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i9M 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i9M equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e7,5 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885175300362,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i9m-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i9-max-36v-42v-2a","title":"Standard charger iScooter i9 Max 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i9 Max – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i9 Max delivers a 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 10 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i9 Max, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 10 Ah : approximately 5 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i9 Max\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i9 Max\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i9-max-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 10 Ah : approximately 5 h.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i9-max\"\u003ecollection of chargers iScooter i9 Max\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i9 Max 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns l-l-iiScooter i9 Max equipped with a lithium-ion battery 36V and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e10 Ah: about 5 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885175791882,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i9-max-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i12-36v-42v-2a","title":"Standard charger iScooter i12 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i12 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i12 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 7,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i12, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 7,5 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i12\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i12\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i12-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 7,5 Ah : approximately 3 h 45.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i12\"\u003ecollection of chargers iScooter i12\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i12 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i12 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e7,5 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885176054026,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i12-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i14-36v-42v-2a","title":"Standard charger iScooter i14 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter i14 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i14 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S)\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i14, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i14\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i14\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i14-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i14\"\u003ecollection of chargers iScooter i14\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i14 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i14 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885176348938,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i14-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-w5-36v-42v-2a","title":"Standard charger iScooter W5 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter W5 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter W5 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S)\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W5, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W5\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W5\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w5-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w5\"\u003eiScooter W5 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W5 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W5 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885176480010,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-w5-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-w6-36v-42v-2a","title":"Standard charger iScooter W6 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter W6 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter W6 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 10,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W6, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 10,5 Ah : approximately 5 h 15\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W6\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W6\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w6-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 10,5 Ah : approximately 5 h 15.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w6\"\u003eiScooter W6 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W6 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W6 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e10,5 Ah: about 5 h 15. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885176578314,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-w6-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-w7-36v-42v-2a","title":"Standard charger iScooter W7 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter W7 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter W7 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S) — 7,8 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W7, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 7,8 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W7\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W7\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w7-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 7,8 Ah : approximately 3 h 45.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w7\"\u003eiScooter W7 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W7 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W7 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e7,8 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885176676618,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-w7-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-s9-36v-42v-2a","title":"Standard charger iScooter S9 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter S9 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter S9 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S)\u003c\/li\u003e\n\u003cli\u003eModel: iScooter S9, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter S9\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter S9\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-s9-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-s9\"\u003eiScooter S9 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter S9 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter S9 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885176938762,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-s9-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-s9-pro-36v-42v-2a","title":"Standard charger iScooter S9 Pro 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter S9 Pro – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter S9 Pro delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S)\u003c\/li\u003e\n\u003cli\u003eModel: iScooter S9 Pro, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter S9 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter S9 Pro\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-s9-pro-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-s9-pro\"\u003eiScooter S9 Pro charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter S9 Pro 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter S9 Pro equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885177790730,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-s9-pro-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-e9-36v-42v-2a","title":"Standard charger iScooter E9 36V-42V 2A","description":"\u003ch2\u003eStandard charger iScooter E9 – 36V (42V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter E9 delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original iScooter jack connector presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 42V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 36V (10S)\u003c\/li\u003e\n\u003cli\u003eModel: iScooter E9, configuration 36V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter jack\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter E9\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 36V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter E9\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-e9-36v-42v-2a\"\u003eStandard 2A charger\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-e9\"\u003eiScooter E9 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter E9 36V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter E9 equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885177987338,"sku":null,"price":34.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-e9-36v-42v-2a-avec-connecteur-jack-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i10-48v-54-6v-2a","title":"Standard charger iScooter i10 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter i10 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i10 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 7 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i10\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10\"\u003ecollection of chargers iScooter i10\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i10 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 7 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885180444938,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i10-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819625"},{"product_id":"chargeur-iscooter-i10-48v-54-6v-4a","title":"Fast Charger iScooter i10 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter i10 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter i10 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i10\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10\"\u003ecollection of chargers iScooter i10\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i10 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885180510474,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-i10-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819658"},{"product_id":"chargeur-iscooter-i10-48v-54-6v-5a","title":"Ultra Fast Charger iScooter i10 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter i10 – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter i10 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter i10\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10\"\u003ecollection of chargers iScooter i10\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i10 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885180739850,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-i10-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819658"},{"product_id":"chargeur-iscooter-i10-pro-48v-54-6v-2a","title":"Standard charger iScooter i10 Pro 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter i10 Pro – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i10 Pro delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Pro, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 7 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter i10 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter i10 Pro\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-pro\"\u003ecollection of chargers iScooter i10 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 Pro 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter i10 Pro equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 7 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885180936458,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i10-pro-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819678"},{"product_id":"chargeur-iscooter-i10-pro-48v-54-6v-4a","title":"Fast Charger iScooter i10 Pro 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter i10 Pro – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter i10 Pro delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Pro, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter i10 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter i10 Pro\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-pro\"\u003ecollection of chargers iScooter i10 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 Pro 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter i10 Pro equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885181296906,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-i10-pro-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819678"},{"product_id":"chargeur-iscooter-i10-pro-48v-54-6v-5a","title":"Ultra Fast Charger iScooter i10 Pro 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter i10 Pro – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter i10 Pro delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Pro, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter i10 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter i10 Pro\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-pro-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-pro\"\u003ecollection of chargers iScooter i10 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 Pro 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter i10 Pro equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885181493514,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-i10-pro-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819678"},{"product_id":"chargeur-iscooter-i10-max-48v-54-6v-2a","title":"Standard charger iScooter i10 Max 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter i10 Max – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i10 Max delivers a 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15,6 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Max, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15,6 Ah : approximately 7 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i10 Max\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10 Max\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15,6 Ah : approximately 7 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15,6 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15,6 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-max\"\u003ecollection of chargers iScooter i10 Max\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 Max 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i10 Max equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15,6 Ah: about 7 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885181886730,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i10-max-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819678"},{"product_id":"chargeur-iscooter-i10-max-48v-54-6v-4a","title":"Fast Charger iScooter i10 Max 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter i10 Max – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter i10 Max delivers a 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15,6 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Max, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15,6 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i10 Max\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10 Max\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15,6 Ah : approximately 7 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15,6 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15,6 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-max\"\u003ecollection of chargers iScooter i10 Max\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 Max 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i10 Max equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15,6 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885182083338,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-i10-max-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819678"},{"product_id":"chargeur-iscooter-i10-max-48v-54-6v-5a","title":"Ultra Fast Charger iScooter i10 Max 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter i10 Max – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter i10 Max delivers a 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15,6 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Max, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15,6 Ah : approximately 3 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i10 Max\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10 Max\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15,6 Ah : approximately 7 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15,6 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-max-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15,6 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-max\"\u003ecollection of chargers iScooter i10 Max\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter i10 Max 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter i10 Max equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15,6 Ah: about 3 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885182279946,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-i10-max-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819697"},{"product_id":"chargeur-iscooter-i10-plus-48v-54-6v-2a","title":"Standard charger iScooter i10 Plus 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter i10 Plus – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter i10 Plus delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Plus, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 8 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i10 More\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10 More\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-plus\"\u003ecollection of chargers iScooter i10 More\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – charger iScooter i10 Plus 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter i10 Plus equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 8 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885182640394,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-i10-plus-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819697"},{"product_id":"chargeur-iscooter-i10-plus-48v-54-6v-4a","title":"Fast Charger iScooter i10 Plus 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter i10 Plus – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter i10 Plus delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Plus, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 4 h 15\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i10 More\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10 More\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-plus\"\u003ecollection of chargers iScooter i10 More\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – charger iScooter i10 Plus 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter i10 Plus equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 4 h 15. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885183000842,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-i10-plus-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819697"},{"product_id":"chargeur-iscooter-i10-plus-48v-54-6v-5a","title":"Ultra Fast Charger iScooter i10 Plus 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter i10 Plus – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter i10 Plus delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter i10 Plus, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 3 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-i-iiScooter i10 More\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter i10 More\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-i10-plus-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-i10-plus\"\u003ecollection of chargers iScooter i10 More\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – charger iScooter i10 Plus 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter i10 Plus equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 3 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885183197450,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-i10-plus-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819697"},{"product_id":"chargeur-iscooter-w8-48v-54-6v-2a","title":"Standard charger iScooter W8 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter W8 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter W8 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 14 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W8, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 14 Ah : approximately 7 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W8\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w8-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 14 Ah : approximately 7 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w8-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 14 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w8\"\u003eiScooter W8 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W8 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W8 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e14 Ah: about 7 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885183557898,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-w8-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819697"},{"product_id":"chargeur-iscooter-w8-48v-54-6v-4a","title":"iScooter W8 48V-54,6V 4A Fast Charger","description":"\u003ch2\u003eFast charger iScooter W8 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter W8 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 14 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W8, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 14 Ah : approximately 3 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W8\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w8-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 14 Ah : approximately 7 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w8-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 14 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w8\"\u003eiScooter W8 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W8 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W8 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e14 Ah: about 3 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885183688970,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-w8-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819717"},{"product_id":"chargeur-iscooter-w9-48v-54-6v-2a","title":"Standard charger iScooter W9 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter W9 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter W9 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 14 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W9, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 14 Ah : approximately 7 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W9\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W9\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w9-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 14 Ah : approximately 7 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w9-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 14 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w9\"\u003eiScooter W9 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W9 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W9 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e14 Ah: about 7 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885183918346,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-w9-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819717"},{"product_id":"chargeur-iscooter-w9-48v-54-6v-4a","title":"iScooter W9 48V-54,6V 4A Fast Charger","description":"\u003ch2\u003eFast charger iScooter W9 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter W9 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 14 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter W9, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 14 Ah : approximately 3 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l,iScooter W9\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for l,iScooter W9\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w9-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 14 Ah : approximately 7 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-w9-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 14 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-w9\"\u003eiScooter W9 charger collection\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter W9 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter W9 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e14 Ah: about 3 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885184114954,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-w9-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819717"},{"product_id":"chargeur-iscooter-ix3-48v-54-6v-2a","title":"Standard charger iScooter iX3 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX3 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX3 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 10 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX3, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 10 Ah : approximately 5 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX3\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX3\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix3-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 10 Ah : approximately 5 h.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix3\"\u003ecollection of chargers iScooter iX3\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX3 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX3 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e10 Ah: about 5 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885184311562,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix3-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819717"},{"product_id":"chargeur-iscooter-ix4-48v-54-6v-2a","title":"Standard charger iScooter iX4 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX4 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX4 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX4, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 7 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX4\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX4\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix4\"\u003ecollection of chargers iScooter iX4\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX4 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX4 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 7 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885188505866,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix4-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819717"},{"product_id":"chargeur-iscooter-ix4-48v-54-6v-4a","title":"Fast Charger iScooter iX4 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter iX4 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter iX4 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX4, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX4\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX4\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix4\"\u003ecollection of chargers iScooter iX4\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX4 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX4 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885188702474,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-ix4-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819736"},{"product_id":"chargeur-iscooter-ix4-48v-54-6v-5a","title":"Ultra Fast Charger iScooter iX4 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter iX4 – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter iX4 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX4, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX4\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX4\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix4-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix4\"\u003ecollection of chargers iScooter iX4\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX4 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX4 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885189062922,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-ix4-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819736"},{"product_id":"chargeur-iscooter-ix5-48v-54-6v-2a","title":"Standard charger iScooter iX5 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX5 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX5 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX5, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 7 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX5\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX5\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix5\"\u003ecollection of chargers iScooter iX5\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX5 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX5 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 7 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885189259530,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix5-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819737"},{"product_id":"chargeur-iscooter-ix5-48v-54-6v-4a","title":"Fast Charger iScooter iX5 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter iX5 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter iX5 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX5, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX5\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX5\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix5\"\u003ecollection of chargers iScooter iX5\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX5 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX5 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885189619978,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-ix5-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819737"},{"product_id":"chargeur-iscooter-ix5-48v-54-6v-5a","title":"Ultra Fast Charger iScooter iX5 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter iX5 – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter iX5 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX5, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX5\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX5\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix5\"\u003ecollection of chargers iScooter iX5\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX5 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX5 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885189816586,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-ix5-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819737"},{"product_id":"chargeur-iscooter-ix5s-48v-54-6v-2a","title":"Standard charger iScooter iX5S 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX5S – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX5S delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX5S, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 7 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX5S\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX5S\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix5s\"\u003ecollection of chargers iScooter iX5S\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX5S 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX5S equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 7 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885190177034,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix5s-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819756"},{"product_id":"chargeur-iscooter-ix5s-48v-54-6v-4a","title":"Fast Charger iScooter iX5S 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter iX5S – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter iX5S delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX5S, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX5S\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX5S\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix5s\"\u003ecollection of chargers iScooter iX5S\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX5S 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX5S equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885190406410,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-ix5s-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819756"},{"product_id":"chargeur-iscooter-ix5s-48v-54-6v-5a","title":"Ultra Fast Charger iScooter iX5S 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter iX5S – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter iX5S delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 15 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX5S, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 15 Ah : approximately 3 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX5S\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX5S\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 15 Ah : approximately 7 h 30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 15 Ah : approximately 3 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix5s-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 15 Ah : approximately 3 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix5s\"\u003ecollection of chargers iScooter iX5S\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX5S 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX5S equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e15 Ah: about 3 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885190603018,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-ix5s-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819756"},{"product_id":"chargeur-iscooter-ix6-48v-54-6v-2a","title":"Standard charger iScooter iX6 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX6 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX6 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX6, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 8 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX6\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX6\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix6\"\u003ecollection of chargers iScooter iX6\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX6 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX6 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 8 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885190963466,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix6-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819756"},{"product_id":"chargeur-iscooter-ix6-48v-54-6v-4a","title":"Fast Charger iScooter iX6 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter iX6 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter iX6 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX6, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 4 h 15\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX6\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX6\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix6\"\u003ecollection of chargers iScooter iX6\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX6 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX6 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 4 h 15. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885191160074,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-ix6-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819756"},{"product_id":"chargeur-iscooter-ix6-48v-54-6v-5a","title":"Ultra Fast Charger iScooter iX6 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter iX6 – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter iX6 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX6, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 3 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX6\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX6\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix6-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix6\"\u003ecollection of chargers iScooter iX6\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX6 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX6 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 3 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885191356682,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-ix6-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819778"},{"product_id":"chargeur-iscooter-ix7-pro-48v-54-6v-2a","title":"Standard charger iScooter iX7 Pro 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX7 Pro – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX7 Pro delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX7 Pro, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 8 h 45\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter iX7 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter iX7 Pro\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix7-pro\"\u003ecollection of chargers iScooter iX7 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX7 Pro 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter iX7 Pro equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 8 h 45. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885191553290,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix7-pro-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819778"},{"product_id":"chargeur-iscooter-ix7-pro-48v-54-6v-4a","title":"Fast Charger iScooter iX7 Pro 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter iX7 Pro – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter iX7 Pro delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX7 Pro, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 4 h 15\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter iX7 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter iX7 Pro\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix7-pro\"\u003ecollection of chargers iScooter iX7 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX7 Pro 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter iX7 Pro equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 4 h 15. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885191782666,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-ix7-pro-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819778"},{"product_id":"chargeur-iscooter-ix7-pro-48v-54-6v-5a","title":"Ultra Fast Charger iScooter iX7 Pro 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter iX7 Pro – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter iX7 Pro delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 17,5 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX7 Pro, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 17,5 Ah : approximately 3 h 30\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-iiScooter iX7 Pro\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for the iScooter iX7 Pro\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 17,5 Ah : approximately 8 h 45.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 17,5 Ah : approximately 4 h 15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix7-pro-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 17,5 Ah : approximately 3 h 30.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix7-pro\"\u003ecollection of chargers iScooter iX7 Pro\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX7 Pro 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis sheet concerns the iScooter iX7 Pro equipped with a lithium-ion battery 48V and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e17,5 Ah: about 3 h 30. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885192143114,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-ix7-pro-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819778"},{"product_id":"chargeur-iscooter-ix8-48v-54-6v-2a","title":"Standard charger iScooter iX8 48V-54,6V 2A","description":"\u003ch2\u003eStandard charger iScooter iX8 – 48V (54,6V – 2A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 2A for iScooter iX8 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 2A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 20 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX8, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 20 Ah : approximately 10 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX8\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStandard charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 20 Ah : approximately 10 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 20 Ah : approximately 5 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 20 Ah : approximately 4 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix8\"\u003ecollection of chargers iScooter iX8\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX8 48V 2A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX8 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e20 Ah: about 10 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885192503562,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-standard-iscooter-ix8-48v-54-6v-2a-avec-connecteur-gx16-3-source-it.webp?v=1793819778"},{"product_id":"chargeur-iscooter-ix8-48v-54-6v-4a","title":"Fast Charger iScooter iX8 48V-54,6V 4A","description":"\u003ch2\u003eFast charger iScooter iX8 – 48V (54,6V – 4A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 4A for iScooter iX8 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 4A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 20 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX8, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 20 Ah : approximately 5 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX8\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 20 Ah : approximately 10 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 20 Ah : approximately 5 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 20 Ah : approximately 4 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix8\"\u003ecollection of chargers iScooter iX8\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX8 48V 4A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX8 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e20 Ah: about 5 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885193519370,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-rapide-iscooter-ix8-48v-54-6v-4a-avec-connecteur-gx16-3-source-it.webp?v=1793819798"},{"product_id":"chargeur-iscooter-ix8-48v-54-6v-5a","title":"Ultra Fast Charger iScooter iX8 48V-54,6V 5A","description":"\u003ch2\u003eUltra-fast charger iScooter iX8 – 48V (54,6V – 5A) – Active ventilation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis charger Source’IT 5A for iScooter iX8 delivers 54,6V output for the version equipped with a lithium-ion battery 48V (13S). Its active ventilation evacuates heat during the charge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original connector iScooter GX16-3 presented on the photos to branch to the corresponding port of your scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis ultra-fast version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOutput voltage: 54,6V CC\u003c\/li\u003e\n\u003cli\u003echarging current: 5A\u003c\/li\u003e\n\u003cli\u003eBattery: lithium-ion 48V (13S) — 20 Ah depending on version\u003c\/li\u003e\n\u003cli\u003eModel: iScooter iX8, configuration 48V\u003c\/li\u003e\n\u003cli\u003eConnector: original connector iScooter GX16-3\u003c\/li\u003e\n\u003cli\u003eCase: plastic\u003c\/li\u003e\n\u003cli\u003eCooling: Active Cooling\u003c\/li\u003e\n\u003cli\u003eEstimated charging time : 20 Ah : approximately 4 h\u003c\/li\u003e\n\u003cli\u003eContents: charger Source’IT and power cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA charger suitable for l-l-i-iiScooter iX8\u003c\/h2\u003e\u003cp\u003eThe nominal voltage 48V of the battery is distinct from its maximum charging voltage 54,6V. This charger is provided for this lithium-ion configuration and for the GX16-3 connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltra-fast charging with battery-adapted output 48V\u003c\/li\u003e\n\u003cli\u003eOriginal connector iScooter visible in close-up\u003c\/li\u003e\n\u003cli\u003eActive ventilation to limit heat accumulation\u003c\/li\u003e\n\u003cli\u003ePlastic casing\u003c\/li\u003e\n\u003cli\u003eUse as replacement or second charger\u003c\/li\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompare chargers for iScooter iX8\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-2a\"\u003eStandard 2A charger\u003c\/a\u003e — 20 Ah : approximately 10 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-4a\"\u003e4A fast charger\u003c\/a\u003e — 20 Ah : approximately 5 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-hu\/products\/chargeur-iscooter-ix8-48v-54-6v-5a\"\u003e5A Ultra-Fast Charger\u003c\/a\u003e — 20 Ah : approximately 4 h.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.\u003c\/p\u003e\u003cp\u003eFind it \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter-ix8\"\u003ecollection of chargers iScooter iX8\u003c\/a\u003e and range \u003ca href=\"\/en-hu\/collections\/chargeurs-iscooter\"\u003eiScooter\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eUse this charger with the intended battery 48V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.\u003c\/p\u003e\u003ch2\u003eFAQ – Charger iScooter iX8 48V 5A\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my model?\u003c\/h3\u003e\u003cp\u003eThis plug concerns the iScooter iX8 equipped with a lithium-ion 48V battery and the GX16-3 connector presented. Compare your equipment with these indications.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003e20 Ah: about 4 h. This is an estimate for the indicated capacity, not a measured duration.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. Its active ventilation removes heat during loading and limits its accumulation in the housing.\u003c\/p\u003e\u003ch3\u003eCan it be used as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, for the configuration described on this sheet. You can keep a charger on each of your usual places.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarranty 2 years\u003c\/li\u003e\n\u003cli\u003eShipping within 24\/48 hours from France\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed to check your version? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e specifying the model and attaching a photo of the charge port and battery label.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractually binding – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'IT","offers":[{"title":"Default Title","offer_id":53885194010890,"sku":null,"price":94.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/chargeur-ultra-rapide-iscooter-ix8-48v-54-6v-5a-avec-connecteur-gx16-3-source-it.webp?v=1793819798"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/collections\/collection-iscooter-logo-source-it.png?v=1791583724","url":"https:\/\/www.source-it.fr\/en-hu\/collections\/iscooter-chargers.oembed","provider":"Source'it","version":"1.0","type":"link"}