{"title":"Ausom DT2 PRO Chargers","description":"\u003ch2\u003eChargers for Ausom DT2 Pro 52V electric scooter\u003c\/h2\u003e\u003cp\u003eThis collection gathers Source’IT chargers for the Ausom DT2 Pro: 2A standard, 4A fast, and 5A ultra-fast. Whether you are looking for a replacement charger or faster charging, compare the versions based on your scooter’s battery and the connector shown in the photos.\u003c\/p\u003e\u003cp\u003eThe Ausom DT2 Pro uses a 52V 23.4 Ah lithium-ion battery. Its high capacity is suitable for long rides but requires more charging time with a standard 2A current. The 4A and 5A versions allow you to recover range more quickly between trips.\u003c\/p\u003e\u003ch2\u003eBatteries and relevant configurations\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom DT2 Pro:\u003c\/strong\u003e 52V 23.4 Ah (1216.8 Wh) lithium-ion battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe batteries in this selection are 52V class, in a 14S lithium-ion architecture. Their maximum charge voltage is 58.8V. The capacity in Ah specifically determines the time required for a full charge: a higher-capacity battery requires more time with the same charger.\u003c\/p\u003e\u003ch2\u003eWhich charger should you choose for the Ausom DT2 Pro?\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e suitable for standard charging, replacing your charger, or as an extra unit for another location. Plastic casing, 58.8V output, and Active Cooling.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e4A fast:\u003c\/strong\u003e a higher current than the 2A to recover range more quickly on a daily basis. Plastic casing, 58.8V output, and Active Cooling.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e the highest current version in this selection, to shorten charging time compared to the 2A and 4A. Aluminum casing, 58.8V output, and Active Cooling.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-dt2-pro-48v-54-6v-2a\"\u003eAusom DT2 Pro 52V Standard Charger – 58.8V 2A\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-4a\"\u003eAusom DT2 Pro 52V Fast Charger – 58.8V 4A\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-5a\"\u003eAusom DT2 Pro 52V Ultra-fast Charger – 58.8V 5A\u003c\/a\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eEstimated charging times by battery and power\u003c\/h2\u003e\u003ch3\u003eAusom DT2 Pro – 23.4 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 11.5 h\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e4A fast:\u003c\/strong\u003e ≈ 5.75 h\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4.5 h\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese durations are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and battery condition will cause the actual time to vary.\u003c\/p\u003e\u003ch2\u003eOriginal connector and compatibility\u003c\/h2\u003e\u003cp\u003eThe products in this collection use the original Ausom 3-pin red connector shown in their photos. The charging voltage and the connector must both match your scooter. A 52V battery or a visually similar plug alone are not enough to confirm the wiring.\u003c\/p\u003e\u003cp\u003eChoose your version based on its exact model and original battery. The Ausom families do not all share the same voltage or connector: the brand page allows you to find the suitable selection.\u003c\/p\u003e\u003ch2\u003eActive cooling and charger casing\u003c\/h2\u003e\u003cp\u003eThe chargers in this collection are equipped with active cooling that promotes efficient heat dissipation during long charging sessions. The casing type is detailed on each product page: this refers to the charger’s casing, which is distinct from the scooter’s battery casing.\u003c\/p\u003e\u003cp\u003eThe 2A and 4A versions have a plastic casing; the 5A has an aluminum casing. All are equipped with Active Cooling.\u003c\/p\u003e\u003ch2\u003eFAQ – Choosing an Ausom DT2 Pro charger\u003c\/h2\u003e\u003ch3\u003eWhy a 58.8V charger for a 52V battery?\u003c\/h3\u003e\u003cp\u003eThe 52V value refers to the nominal voltage class of the battery. The 58.8V value is its maximum charge voltage in a 14S lithium-ion architecture. The product pages specify both values to make choosing easier.\u003c\/p\u003e\u003ch3\u003eDoes the fast charger change the range?\u003c\/h3\u003e\u003cp\u003eThe higher current shortens the charging time. It does not change the battery’s capacity in Ah or its range at full charge; the latter also depends on how the scooter is used.\u003c\/p\u003e\u003ch3\u003eDo all batteries in the range require the same amount of time?\u003c\/h3\u003e\u003cp\u003eNo. The capacity and the chosen current determine the estimated time. Find your model and its capacity in the charging time list, then consult the page for the desired power.\u003c\/p\u003e\u003ch3\u003eCan the charger be used as a spare unit?\u003c\/h3\u003e\u003cp\u003eYes, to keep one charger at home and another at a different location. Simultaneous charging with two chargers requires verifying the ports and the total current accepted by your configuration.\u003c\/p\u003e\u003ch3\u003eHow do I check the plug before purchasing?\u003c\/h3\u003e\u003cp\u003eCompare your scooter’s port to the original Ausom 3-pin red connector visible on the product pages. If in doubt, our support team can verify your model based on photos and battery information.\u003c\/p\u003e\u003ch2\u003eFind other Ausom chargers\u003c\/h2\u003e\u003cp\u003eConsult \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom\"\u003ethe collection of chargers for Ausom electric scooters\u003c\/a\u003e to find other models, voltages, and connectors offered by Source’IT.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with the exact model, a photo of the charging port, and the battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are for illustrative purposes only – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"chargeur-ausom-dt2-pro-48v-54-6v-2a","title":"Ausom DT2 PRO 52V - 58.8V 2A Charger","description":"\u003ch2\u003eAusom DT2 Pro Standard Charger – 52V (58.8V – 2A) – Active Cooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis 2A standard charger for the Ausom DT2 Pro delivers a 58.8V output. It is designed for the original 52V (14S) lithium-ion battery configurations detailed below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original red 3-pin Ausom connector shown in the photos, allowing it to plug directly into the corresponding charging port on your electric scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIts 2A current is suitable for standard charging and serves as a replacement solution or an additional charger to keep at another charging location.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis charger is equipped with active cooling to promote efficient heat dissipation during long charging sessions. This version features a plastic housing.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 58.8V DC.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCharging current:\u003c\/strong\u003e 2A.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBattery type:\u003c\/strong\u003e 52V (14S) lithium-ion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eConnector:\u003c\/strong\u003e original red 3-pin Ausom connector.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHousing:\u003c\/strong\u003e plastic.\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003eCooling: Active Cooling.\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEstimated charging time for Ausom DT2 Pro (23.4 Ah):\u003c\/strong\u003e ≈ 11.5 hours.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 kg.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eIntegrated protections:\u003c\/strong\u003e overvoltage, overcurrent, overheating, and short-circuit.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLED indicator:\u003c\/strong\u003e red = charging \/ green = charge complete.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Source’IT charger and power cord.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eA charger adapted for the Ausom DT2 Pro\u003c\/h2\u003e\u003cp\u003eThe Ausom DT2 Pro uses a 52V 23.4 Ah lithium-ion battery. Its large capacity is suitable for long rides but requires more charging time with a standard 2A current. The 4A and 5A versions allow for faster recovery of range between trips.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom DT2 Pro:\u003c\/strong\u003e 52V 23.4 Ah (1216.8 Wh) lithium-ion battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 52V nominal voltage refers to the battery; the 58.8V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This listing targets the original configurations listed, with the pictured connector.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eOutput regulated at 58.8V for the corresponding 52V configuration.\u003c\/li\u003e\n\n\u003cli\u003eOriginal red 3-pin Ausom connector visible in the photos.\u003c\/li\u003e\n\n\u003cli\u003eStandard charging to replace your charger or have an additional unit.\u003c\/li\u003e\n\n\u003cli\u003eActive cooling to vent internal heat.\u003c\/li\u003e\n\n\u003cli\u003ePlastic housing and integrated electronic protections.\u003c\/li\u003e\n\n\u003cli\u003e2-year warranty and Source’IT technical support.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eComparing Ausom DT2 Pro chargers\u003c\/h2\u003e\u003cp\u003eVersions in this family deliver the same final voltage of 58.8V. The charging current, housing, and estimated duration distinguish the products. The 2A is suitable for standard charging, the 4A for fast charging, and the 5A for shorter charging.\u003c\/p\u003e\u003ch3\u003eAusom DT2 Pro – 23.4 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 11.5 hours\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e4A fast:\u003c\/strong\u003e ≈ 5.75 hours\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4.5 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese durations are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and battery condition will cause the actual time to vary.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-dt2-pro-48v-54-6v-2a\"\u003eAusom DT2 Pro Standard Charger 52V – 58.8V 2A\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-4a\"\u003eAusom DT2 Pro Fast Charger 52V – 58.8V 4A\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-5a\"\u003eAusom DT2 Pro Ultra-Fast Charger 52V – 58.8V 5A\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFind \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom-dt2-pro\"\u003eall Ausom DT2 Pro chargers\u003c\/a\u003e to compare versions and check their photos.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eRegulation at 58.8V and electronic protections accompany the charging of the corresponding 52V battery. Active cooling cools the charger; it does not directly cool the battery. Leave the openings unobstructed and allow a hot battery to cool down after use.\u003c\/p\u003e\u003ch2\u003eFAQ – Ausom DT2 Pro 2A Charger\u003c\/h2\u003e\u003ch3\u003eIs this charger suitable for my scooter?\u003c\/h3\u003e\u003cp\u003eIt corresponds to the models and batteries listed in the compatibility section, with the pictured original red 3-pin Ausom connector. Check the exact model, voltage, and plug of your version before choosing.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003eAusom DT2 Pro 23.4 Ah: approximately 11.5 hours with this 2A charger. A partially charged battery will take less time.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. This 2A version has active cooling and a plastic housing. The fan may be audible during charging.\u003c\/p\u003e\u003ch3\u003eCan I keep it as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, to have a charger at another location. The simultaneous use of two chargers depends on the ports and the total current accepted by the scooter version; it cannot be assumed simply by the presence of two sockets.\u003c\/p\u003e\u003ch3\u003eWhat is the difference from other power ratings?\u003c\/h3\u003e\u003cp\u003eThe 2A is the standard version of this family. The list and links above allow you to compare other versions for your exact battery capacity.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Email \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with the exact model, a photo of the charging port, and the battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are not contractual – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'it","offers":[{"title":"Default Title","offer_id":52182090645770,"sku":null,"price":54.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/Chargeur_Ausom_DT2_PRO_52V_-_58_8V_2A_-_Source_IT.webp?v=1764188683"},{"product_id":"chargeur-rapide-ausom-dt2-pro-52v-58-8v-5a","title":"Ausom DT2 PRO 52V - 58.8V 5A Ultra-Fast Charger","description":"\u003ch2\u003eAusom DT2 Pro Ultra-Fast Charger – 52V (58.8V – 5A) – Active Cooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis 5A ultra-fast charger for the Ausom DT2 Pro provides a 58.8V output. It is designed for the original 52V (14S) lithium-ion battery configurations detailed below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original 3-pin red Ausom connector shown in the photos, in order to plug directly into the corresponding charging port on your electric scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIts 5A current is the highest among the versions offered in this selection. It allows for shorter charging times compared to the 2A and, where available, the 4A versions.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis charger is equipped with active cooling to promote efficient heat dissipation during long charging sessions. This version features an aluminum casing.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 58.8V DC.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCharging current:\u003c\/strong\u003e 5A.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBattery type:\u003c\/strong\u003e 52V (14S) lithium-ion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eConnector:\u003c\/strong\u003e original 3-pin red Ausom connector.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCasing:\u003c\/strong\u003e aluminum.\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003eCooling: Active Ventilation.\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEstimated charging time for Ausom DT2 Pro (23.4 Ah):\u003c\/strong\u003e ≈ 4 h 30 min.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 kg.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBuilt-in protections:\u003c\/strong\u003e overvoltage, overcurrent, overheating, and short-circuit.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLED indicator:\u003c\/strong\u003e red = charging \/ green = charge complete.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eContents:\u003c\/strong\u003e Source’IT charger and power cord.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eA charger adapted for the Ausom DT2 Pro\u003c\/h2\u003e\u003cp\u003eThe Ausom DT2 Pro uses a 52V 23.4 Ah lithium-ion battery. Its high capacity is suitable for long rides but requires more charging time with a standard 2A current. The 4A and 5A versions allow you to recover battery life more quickly between trips.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom DT2 Pro:\u003c\/strong\u003e 52V 23.4 Ah (1216.8 Wh) lithium-ion battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 52V nominal voltage refers to the battery; the 58.8V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This product page targets the original configurations listed, with the photographed connector.\u003c\/p\u003e\u003ch2\u003eThe benefits of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eOutput regulated at 58.8V for the corresponding 52V configuration.\u003c\/li\u003e\n\n\u003cli\u003eOriginal 3-pin red Ausom connector visible in the photos.\u003c\/li\u003e\n\n\u003cli\u003eUltra-fast charging to reduce wait time compared to 2A.\u003c\/li\u003e\n\n\u003cli\u003eActive cooling to dissipate internal heat.\u003c\/li\u003e\n\n\u003cli\u003eAluminum casing and integrated electronic protections.\u003c\/li\u003e\n\n\u003cli\u003e2-year warranty and Source’IT technical support.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eComparing Ausom DT2 Pro chargers\u003c\/h2\u003e\u003cp\u003eThe versions in this family deliver the same final voltage of 58.8V. The charging current, casing, and estimated duration distinguish the products. The 2A is suitable for standard charging, the 4A for fast charging, and the 5A for shorter charging times.\u003c\/p\u003e\u003ch3\u003eAusom DT2 Pro – 23.4 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 11 h 30 min\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e4A fast:\u003c\/strong\u003e ≈ 5 h 45 min\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4 h 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese times are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter-hour. The starting level, temperature, and battery condition will affect the actual time.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-dt2-pro-48v-54-6v-2a\"\u003eAusom DT2 Pro 52V – 58.8V 2A Standard Charger\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-4a\"\u003eAusom DT2 Pro 52V – 58.8V 4A Fast Charger\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-5a\"\u003eAusom DT2 Pro 52V – 58.8V 5A Ultra-Fast Charger\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFind \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom-dt2-pro\"\u003eall Ausom DT2 Pro chargers\u003c\/a\u003e to compare versions and check their photos.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eThe 58.8V regulation and electronic protections are designed for charging the corresponding 52V battery. Active cooling cools the charger; it does not directly cool the battery. Keep the vents clear and allow a hot battery to cool down after use.\u003c\/p\u003e\u003ch2\u003eFAQ – Ausom DT2 Pro 5A Charger\u003c\/h2\u003e\u003ch3\u003eIs this charger suitable for my scooter?\u003c\/h3\u003e\u003cp\u003eIt corresponds to the models and batteries listed in the compatibility section, with the original 3-pin red Ausom connector photographed. Check your specific model, voltage, and plug type before choosing.\u003c\/p\u003e\u003ch3\u003eHow long does it take to charge?\u003c\/h3\u003e\u003cp\u003eAusom DT2 Pro 23.4 Ah: about 4 h 30 min with this 5A charger. A partially charged battery takes less time.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. This 5A version features Active Cooling and an aluminum casing. The fan may be audible during charging.\u003c\/p\u003e\u003ch3\u003eCan I keep it as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, to have a charger in another charging location. The simultaneous use of two chargers depends on the ports and total current accepted by the scooter version; it cannot be assumed simply by the presence of two sockets.\u003c\/p\u003e\u003ch3\u003eWhat is the difference compared to the other power levels?\u003c\/h3\u003e\u003cp\u003eThe 5A reduces charging time compared to the 2A standard. The list and links above allow you to compare other versions for your specific battery capacity.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Email \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with your exact model, a photo of the charging port, and battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos for illustration purposes only – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'it","offers":[{"title":"Default Title","offer_id":52182107783434,"sku":null,"price":135.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/Chargeur_Ultra_Rapide_Ausom_DT2_PRO_52V_-_58_8V_5A_-_Source_IT.webp?v=1772742067"},{"product_id":"chargeur-rapide-ausom-dt2-pro-52v-58-8v-4a","title":"Ausom DT2 PRO 52V - 58.8V 4A Fast Charger","description":"\u003ch2\u003eAusom DT2 Pro Fast Charger – 52V (58.8V – 4A) – Active Cooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis 4A fast charger for the Ausom DT2 Pro delivers a 58.8V output. It is designed for the original 52V (14S) lithium-ion battery configurations detailed below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original red 3-pin Ausom connector shown in the photos, allowing it to plug directly into the corresponding charging port on your electric scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIts 4A current reduces charging time compared to the standard 2A version. It is suitable for quickly recovering range between two trips.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis charger is equipped with active cooling to promote efficient heat dissipation during long charging sessions. This version has a plastic casing.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 58.8V DC.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCharging current:\u003c\/strong\u003e 4A.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBattery type:\u003c\/strong\u003e 52V (14S) lithium-ion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eConnector:\u003c\/strong\u003e original red 3-pin Ausom connector.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCasing:\u003c\/strong\u003e plastic.\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003eCooling: Active Cooling.\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEstimated charging time for Ausom DT2 Pro (23.4 Ah):\u003c\/strong\u003e ≈ 5 h 45.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.6 kg.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBuilt-in protections:\u003c\/strong\u003e overvoltage, overcurrent, overheating, and short-circuit.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLED indicator:\u003c\/strong\u003e red = charging \/ green = charge complete.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eContents:\u003c\/strong\u003e Source’IT charger and power cord.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eA charger adapted to the Ausom DT2 Pro\u003c\/h2\u003e\u003cp\u003eThe Ausom DT2 Pro uses a 52V 23.4 Ah lithium-ion battery. Its high capacity is suitable for long trips, but requires more charging time with a standard 2A current. The 4A and 5A versions allow for faster range recovery between trips.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom DT2 Pro:\u003c\/strong\u003e 52V 23.4 Ah (1216.8 Wh) lithium-ion battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 52V nominal voltage refers to the battery; the 58.8V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This product page is intended for the original configurations listed, with the pictured connector.\u003c\/p\u003e\u003ch2\u003eThe advantages of this 4A version\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eOutput regulated at 58.8V for the corresponding 52V configuration.\u003c\/li\u003e\n\n\u003cli\u003eOriginal red 3-pin Ausom connector visible in the photos.\u003c\/li\u003e\n\n\u003cli\u003eFast charging to reduce wait times compared to 2A.\u003c\/li\u003e\n\n\u003cli\u003eActive cooling to exhaust internal heat.\u003c\/li\u003e\n\n\u003cli\u003ePlastic casing and integrated electronic protections.\u003c\/li\u003e\n\n\u003cli\u003e2-year warranty and Source’IT technical support.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eComparing Ausom DT2 Pro chargers\u003c\/h2\u003e\u003cp\u003eThe versions in this range deliver the same final voltage of 58.8V. The charging current, casing, and estimated duration distinguish the products. The 2A is suitable for standard charging, the 4A for fast charging, and the 5A for even shorter charging times.\u003c\/p\u003e\u003ch3\u003eAusom DT2 Pro – 23.4 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 11 h 30\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e4A fast:\u003c\/strong\u003e ≈ 5 h 45\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4 h 30\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese durations are estimates for a 0 to 100% charge using a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and battery condition will cause the actual time to vary.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-dt2-pro-48v-54-6v-2a\"\u003eAusom DT2 Pro 52V – 58.8V 2A standard charger\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-4a\"\u003eAusom DT2 Pro 52V – 58.8V 4A fast charger\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-dt2-pro-52v-58-8v-5a\"\u003eAusom DT2 Pro 52V – 58.8V 5A ultra-fast charger\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFind \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom-dt2-pro\"\u003eall Ausom DT2 Pro chargers\u003c\/a\u003e to compare versions and verify their photos.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eThe 58.8V regulation and electronic protections accompany the charging of the corresponding 52V battery. Active cooling cools the charger; it does not directly cool the battery. Keep the vents clear and allow a hot battery to cool down after use.\u003c\/p\u003e\u003ch2\u003eFAQ – Ausom DT2 Pro 4A Charger\u003c\/h2\u003e\u003ch3\u003eIs this charger suitable for my scooter?\u003c\/h3\u003e\u003cp\u003eIt corresponds to the models and batteries listed in the compatibility section, with the pictured original red 3-pin Ausom connector. Check the exact model, voltage, and plug of your version before choosing.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003eAusom DT2 Pro 23.4 Ah: approximately 5 h 45 with this 4A charger. A partially charged battery will take less time.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. This 4A version features Active Cooling and a plastic casing. The fan may be audible during charging.\u003c\/p\u003e\u003ch3\u003eCan I keep it as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, to have a charger at another charging location. The simultaneous use of two chargers depends on the ports and the total current accepted by the scooter version; it cannot be assumed simply by the presence of two sockets.\u003c\/p\u003e\u003ch3\u003eWhat is the difference compared to other power levels?\u003c\/h3\u003e\u003cp\u003eThe 4A reduces charging time compared to the 2A standard. The list and links above allow you to compare other versions for your battery's exact capacity.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Email \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with the exact model, a photo of the charging port, and the battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos are for illustrative purposes only – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'it","offers":[{"title":"Default Title","offer_id":52669469491466,"sku":null,"price":84.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/Chargeur_Rapide_Ausom_DT2_PRO_52V_-_58_8V_4A_-_Source_IT.png?v=1772742035"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/collections\/Ausom_DT2_PRO.jpg?v=1764099677","url":"https:\/\/www.source-it.fr\/en\/collections\/ausom-dt2-pro-chargers.oembed","provider":"Source'it","version":"1.0","type":"link"}