{"title":"Ausom F1 MAX Chargers","description":"\u003ch2\u003eChargers for Ausom F1 Max 60V electric scooters\u003c\/h2\u003e\u003cp\u003eThis collection gathers Source’IT chargers for the Ausom F1 Max: 2A standard, 5A ultra-fast. Whether you are looking for a replacement charger or faster charging, compare the versions based on your scooter's battery and the connector shown in the photos.\u003c\/p\u003e\u003cp\u003eThe Ausom F1 Max stands out in this range due to its 60V 20.8 Ah lithium-ion battery. It requires a charging output of 67.2V: the 54.6V chargers for the L1 and L2 series or the 58.8V chargers for the DT2 Pro and SR1 do not match this configuration.\u003c\/p\u003e\u003ch2\u003eBatteries and configurations concerned\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom F1 Max:\u003c\/strong\u003e 60V 20.8 Ah lithium-ion battery (1248 Wh).\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe batteries in this selection are of the 60V class, with a 16S lithium-ion architecture. Their maximum charging voltage is 67.2V. The capacity in Ah specifically determines the time required for a full charge: a battery with a higher capacity requires more time with the same charger.\u003c\/p\u003e\u003ch2\u003eWhich charger to choose for the Ausom F1 Max?\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e suitable for standard charging, as a replacement charger, or as an extra unit for another location. Plastic casing, 67.2V output, and Active Cooling.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e the version with the highest current in this selection, to shorten charging time compared to the 2A. Aluminum casing, 67.2V output, and Active Cooling.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-f1-max-60v-67-2v-2a\"\u003eAusom F1 Max 60V standard charger – 67.2V 2A\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-f1-max-60v-67-2v-5a\"\u003eAusom F1 Max 60V ultra-fast charger – 67.2V 5A\u003c\/a\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eEstimated charging times by battery and power\u003c\/h2\u003e\u003ch3\u003eAusom F1 Max – 20.8 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 10 h 15\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4 h\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese durations are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and condition of the battery will cause the actual time to vary.\u003c\/p\u003e\u003ch2\u003eOriginal connector and compatibility\u003c\/h2\u003e\u003cp\u003eThe products in this collection use the original red 3-pin Ausom connector shown in their photos. The charging voltage and the connector must both match your scooter. A 60V battery or a visually similar plug are not, on their own, sufficient to confirm the wiring.\u003c\/p\u003e\u003cp\u003eChoose your version based on its exact model and its original battery. Not all Ausom families share the same voltage or the same connector: the brand page allows you to find the suitable selection.\u003c\/p\u003e\u003ch2\u003eActive cooling and charger casing\u003c\/h2\u003e\u003cp\u003eThe chargers in this collection are equipped with active cooling that promotes efficient heat dissipation during long charging sessions. The type of casing is detailed on each product page: this refers to the charger's casing, which is distinct from the scooter's battery casing.\u003c\/p\u003e\u003cp\u003eThe 2A versions come in a plastic casing; the 5A comes in an aluminum casing. All are equipped with Active Cooling.\u003c\/p\u003e\u003ch2\u003eFAQ – Choosing an Ausom F1 Max charger\u003c\/h2\u003e\u003ch3\u003eWhy a 67.2V charger for a 60V battery?\u003c\/h3\u003e\u003cp\u003eThe 60V value refers to the nominal voltage class of the battery. The 67.2V value is its maximum charging voltage in a 16S lithium-ion architecture. The product pages specify both values to facilitate your choice.\u003c\/p\u003e\u003ch3\u003eDoes the fast charger change the range?\u003c\/h3\u003e\u003cp\u003eThe higher current shortens the charging time. It does not change the Ah capacity of the battery or its range when fully charged; the latter also depends on how the scooter is used.\u003c\/p\u003e\u003ch3\u003eDo all batteries in the range require the same time?\u003c\/h3\u003e\u003cp\u003eNo. The capacity and the chosen current determine the estimated duration. Find your model and its capacity in the charging time list, then consult the page for the desired power.\u003c\/p\u003e\u003ch3\u003eCan the charger be used as a spare?\u003c\/h3\u003e\u003cp\u003eYes, to keep one charger at home and another at a different location. Simultaneous charging with two chargers requires verifying the ports and the total current accepted by your configuration.\u003c\/p\u003e\u003ch3\u003eHow to check the plug before purchase?\u003c\/h3\u003e\u003cp\u003eCompare the port on your scooter to the original red 3-pin Ausom connector visible on the product pages. If in doubt, our support team can verify your model based on photos and battery information.\u003c\/p\u003e\u003ch2\u003eFind other Ausom chargers\u003c\/h2\u003e\u003cp\u003eConsult \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom\"\u003ethe collection of chargers for Ausom electric scooters\u003c\/a\u003e to find other models, voltages, and connectors offered by Source’IT.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with the exact model, a photo of the charging port, and the battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos non-contractual – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"chargeur-ausom-f1-max-60v-67-2v-2a","title":"Ausom F1 MAX 60V - 67.2V 2A charger","description":"\u003ch2\u003eAusom F1 Max Standard Charger – 60V (67.2V – 2A) – Active Cooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis 2A standard charger for the Ausom F1 Max delivers a 67.2V output. It is designed for the original 60V (16S) lithium-ion battery configurations detailed below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original red 3-pin Ausom connector shown in the photos, allowing it to plug directly into the corresponding charging port on your electric scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIts 2A current is suitable for standard charging and serves as a replacement or an additional charger to keep at another charging location.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis charger is equipped with active cooling to promote efficient heat dissipation during long charging sessions. This version has a plastic casing.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 67.2V DC.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCharging current:\u003c\/strong\u003e 2A.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBattery type:\u003c\/strong\u003e 60V (16S) lithium-ion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eConnector:\u003c\/strong\u003e original red 3-pin Ausom connector.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCasing:\u003c\/strong\u003e plastic.\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003eCooling: Active Cooling.\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEstimated charging time Ausom F1 Max (20.8 Ah):\u003c\/strong\u003e ≈ 10h 15min.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 kg.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eIntegrated protections:\u003c\/strong\u003e overvoltage, overcurrent, overheating, and short-circuit.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLED indicator:\u003c\/strong\u003e red = charging \/ green = charge complete.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eContents:\u003c\/strong\u003e Source’IT charger and power cord.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eA charger adapted for the Ausom F1 Max\u003c\/h2\u003e\u003cp\u003eThe Ausom F1 Max stands out in this range with its 60V 20.8 Ah lithium-ion battery. It requires a 67.2V charging output: the 54.6V chargers for L1 and L2 series or the 58.8V chargers for the DT2 Pro and SR1 models do not match this configuration.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom F1 Max:\u003c\/strong\u003e 60V 20.8 Ah (1248 Wh) lithium-ion battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 60V nominal voltage refers to the battery; the 67.2V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This product page targets the listed original configurations, using the connector shown in the photos.\u003c\/p\u003e\u003ch2\u003eThe benefits of this 2A version\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eOutput regulated at 67.2V for the corresponding 60V configuration.\u003c\/li\u003e\n\n\u003cli\u003eOriginal red 3-pin Ausom connector visible in the photos.\u003c\/li\u003e\n\n\u003cli\u003eStandard charging to replace the original charger or to have a spare.\u003c\/li\u003e\n\n\u003cli\u003eActive cooling to vent internal heat.\u003c\/li\u003e\n\n\u003cli\u003ePlastic casing and integrated electronic protections.\u003c\/li\u003e\n\n\u003cli\u003e2-year warranty and Source’IT technical support.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eComparing Ausom F1 Max chargers\u003c\/h2\u003e\u003cp\u003eAll versions in this family deliver the same final voltage of 67.2V. The products differ by charging current, casing, and estimated time. The 2A is suitable for standard charging, while the 5A allows for faster charging.\u003c\/p\u003e\u003ch3\u003eAusom F1 Max – 20.8 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 10h 15min\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4h\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese times are estimates for a 0 to 100% charge using a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and battery condition will affect actual time.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-f1-max-60v-67-2v-2a\"\u003eAusom F1 Max 60V – 67.2V 2A standard charger\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-f1-max-60v-67-2v-5a\"\u003eAusom F1 Max 60V – 67.2V 5A ultra-fast charger\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFind \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom-f1-max\"\u003eall Ausom F1 Max chargers\u003c\/a\u003e to compare versions and check their photos.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eThe 67.2V regulation and electronic protections accompany the charging of the corresponding 60V battery. The active cooling cools the charger; it does not cool the battery directly. Keep air vents clear and allow a hot battery to cool down after use.\u003c\/p\u003e\u003ch2\u003eFAQ – Ausom F1 Max 2A Charger\u003c\/h2\u003e\u003ch3\u003eIs this charger suitable for my scooter?\u003c\/h3\u003e\u003cp\u003eIt corresponds to the models and batteries listed in the compatibility section, using the original red 3-pin Ausom connector shown in the photos. Check the exact model, voltage, and plug of your version before choosing.\u003c\/p\u003e\u003ch3\u003eHow long does the charge take?\u003c\/h3\u003e\u003cp\u003eAusom F1 Max 20.8 Ah: approximately 10h 15min with this 2A charger. A partially charged battery will take less time.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. This 2A version features Active Cooling and a plastic casing. The fan may be audible during charging.\u003c\/p\u003e\u003ch3\u003eCan I keep it as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, to have a charger at a different location. The simultaneous use of two chargers depends on the ports and the total current accepted by the scooter version; it cannot be assumed simply by the presence of two plugs.\u003c\/p\u003e\u003ch3\u003eWhat is the difference compared to other wattages?\u003c\/h3\u003e\u003cp\u003eThe 2A is the standard version of this family. The list and links above allow you to compare other versions to match your battery's exact capacity.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Email \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with your exact model, a photo of the charging port, and battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePhotos non-contractual – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'it","offers":[{"title":"Default Title","offer_id":52186060554506,"sku":null,"price":54.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/Chargeur_Ausom_F1_MAX_60V_-_67_2V_2A_-_Source_IT.webp?v=1764256718"},{"product_id":"chargeur-rapide-ausom-f1-max-60v-67-2v-5a","title":"Ausom F1 MAX 60V - 67.2V 5A Ultra-Fast Charger","description":"\u003ch2\u003eAusom F1 Max Ultra-Fast Charger – 60V (67.2V – 5A) – Active Cooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThis 5A ultra-fast charger for the Ausom F1 Max delivers a 67.2V output. It is designed for the original 60V (16S) lithium-ion battery configurations detailed below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt uses the original red 3-pin Ausom connector shown in the photos, in order to plug directly into the corresponding charging port of your electric scooter.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIts 5A current is the highest among the versions offered in this selection. It allows for a shorter charging time compared to the 2A and, when offered, the 4A versions.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis charger is equipped with active cooling to promote efficient heat dissipation during long charging sessions. This version has an aluminum housing.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 67.2V DC.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCharging current:\u003c\/strong\u003e 5A.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBattery type:\u003c\/strong\u003e 60V (16S) lithium-ion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eConnector:\u003c\/strong\u003e original red 3-pin Ausom connector.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHousing:\u003c\/strong\u003e aluminum.\u003c\/li\u003e\n\n\u003cli\u003e\u003cstrong\u003eCooling: Active Cooling.\u003c\/strong\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEstimated charging time for Ausom F1 Max (20.8 Ah):\u003c\/strong\u003e ≈ 4 h.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.4 kg.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBuilt-in protections:\u003c\/strong\u003e overvoltage, overcurrent, overheating, and short-circuit.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLED indicator:\u003c\/strong\u003e red = charging \/ green = charge complete.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eContents:\u003c\/strong\u003e Source’IT charger and power cord.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eA charger adapted to the Ausom F1 Max\u003c\/h2\u003e\u003cp\u003eThe Ausom F1 Max stands out in this range due to its 60V 20.8 Ah lithium-ion battery. It requires a 67.2V charging output: the 54.6V chargers for the L1 and L2 series or the 58.8V chargers for the DT2 Pro and SR1 do not correspond to this configuration.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\n\n\u003cstrong\u003eAusom F1 Max:\u003c\/strong\u003e 60V 20.8 Ah (1248 Wh) lithium-ion battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 60V nominal voltage refers to the battery; the 67.2V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This product sheet is intended for the listed original configurations, with the connector photographed.\u003c\/p\u003e\u003ch2\u003eThe benefits of this 5A version\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eOutput regulated at 67.2V for the corresponding 60V configuration.\u003c\/li\u003e\n\n\u003cli\u003eOriginal red 3-pin Ausom connector visible in the photos.\u003c\/li\u003e\n\n\u003cli\u003eUltra-fast charging to reduce wait time compared to the 2A version.\u003c\/li\u003e\n\n\u003cli\u003eActive cooling to exhaust internal heat.\u003c\/li\u003e\n\n\u003cli\u003eAluminum housing and built-in electronic protections.\u003c\/li\u003e\n\n\u003cli\u003e2-year warranty and Source’IT technical support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eComparing Ausom F1 Max chargers\u003c\/h2\u003e\u003cp\u003eThe versions in this family deliver the same final voltage of 67.2V. The charging current, housing, and estimated time distinguish the products. The 2A is suitable for standard charging, and the 5A for faster charging.\u003c\/p\u003e\u003ch3\u003eAusom F1 Max – 20.8 Ah\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e2A standard:\u003c\/strong\u003e ≈ 10 h 15\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e5A ultra-fast:\u003c\/strong\u003e ≈ 4 h\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese times are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and battery condition will cause the actual time to vary.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-ausom-f1-max-60v-67-2v-2a\"\u003eAusom F1 Max 60V – 67.2V 2A standard charger\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.source-it.fr\/products\/chargeur-rapide-ausom-f1-max-60v-67-2v-5a\"\u003eAusom F1 Max 60V – 67.2V 5A ultra-fast charger\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFind \u003ca href=\"https:\/\/www.source-it.fr\/collections\/chargeurs-ausom-f1-max\"\u003eall Ausom F1 Max chargers\u003c\/a\u003e to compare the versions and check their photos.\u003c\/p\u003e\u003ch2\u003eSafety and reliability\u003c\/h2\u003e\u003cp\u003eRegulation at 67.2V and electronic protections are provided for charging the corresponding 60V battery. Active cooling cools the charger; it does not directly cool the battery. Keep openings clear and allow a hot battery to cool down after use.\u003c\/p\u003e\u003ch2\u003eFAQ – Ausom F1 Max 5A Charger\u003c\/h2\u003e\u003ch3\u003eIs this charger suitable for my scooter?\u003c\/h3\u003e\u003cp\u003eIt corresponds to the models and batteries listed in the compatibility section, with the original red 3-pin Ausom connector photographed. Check the exact model, voltage, and plug of your version before choosing.\u003c\/p\u003e\u003ch3\u003eHow long does charging take?\u003c\/h3\u003e\u003cp\u003eAusom F1 Max 20.8 Ah: approximately 4 h with this 5A charger. A partially charged battery takes less time.\u003c\/p\u003e\u003ch3\u003eDoes the charger have a fan?\u003c\/h3\u003e\u003cp\u003eYes. This 5A version has Active Cooling and an aluminum housing. The fan may be audible during charging.\u003c\/p\u003e\u003ch3\u003eCan I keep it as a second charger?\u003c\/h3\u003e\u003cp\u003eYes, to have a charger available in another charging location. Simultaneous use of two chargers depends on the ports and the total current accepted by the version of the scooter; it cannot be assumed simply because there are two sockets.\u003c\/p\u003e\u003ch3\u003eWhat is the difference compared to other power levels?\u003c\/h3\u003e\u003cp\u003eThe 5A reduces charging time compared to the 2A standard. The list and links above allow you to compare other versions for your exact battery capacity.\u003c\/p\u003e\u003ch2\u003eWarranty, shipping, and support\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003e2-year warranty on the Source’IT charger.\u003c\/li\u003e\n\n\u003cli\u003eShipping within 24\/48 hours from France.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a compatibility check? Write to \u003ca href=\"mailto:contact@source-it.fr\"\u003econtact@source-it.fr\u003c\/a\u003e with the exact model, a photo of the charging port, and the battery information.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eNon-contractual photos – Source’IT.\u003c\/em\u003e\u003c\/p\u003e","brand":"Source'it","offers":[{"title":"Default Title","offer_id":52186072744202,"sku":null,"price":135.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/files\/Chargeur_Rapide_Ausom_F1_MAX_60V_-_67_2V_5A_-_Source_IT.webp?v=1764256844"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0895\/6212\/0458\/collections\/Ausom_F1_MAX.jpg?v=1764101724","url":"https:\/\/www.source-it.fr\/en\/collections\/ausom-f1-max-chargers.oembed","provider":"Source'it","version":"1.0","type":"link"}