SOURCE’IT · CHARGING SPECIALIST

Electric Trottint Chargers LANGFEITE

Choose your model to discover its compatible chargers.

Chargers for electric scooters LANGFEITEFind the Source’IT chargers by model LANGFEITE and by battery. Choose a standard, fast or ultra fast charge depending on your battery capacity and the time available. Each plug specifies the o...

Learn more

FIND YOUR CHARGER

Choose your model

View all products
Stock in FranceSubject to model availability
Delivery in 1 to 10 daysDepending on the delivery method
Flexible payment optionsPay in instalments with Klarna
Technical adviceBy email or phone
Check compatibilityUnsure about the voltage or connector?

38 products

NEED A HAND?

Let us help you choose your charger.

Send us your device model and a photo of the connector. We will help you check voltage and compatibility before you buy.

Check compatibility

Chargers for electric scooters LANGFEITE

Find the Source’IT chargers by model LANGFEITE and by battery. Choose a standard, fast or ultra fast charge depending on your battery capacity and the time available. Each plug specifies the output voltage, current, housing, Connectic and estimated duration.

Choosing your LANGFEITE model

Battery voltage and charger voltage

The rated battery voltage and the maximum charge voltage are different: 48V corresponds to an output of 54,6V, 52V to 58,8V, 60V to 67,2V and 72V to 84V. For GT2S, GT4S and GT2 RS with battery 84V, the expected output is 96,6V. Choose the version corresponding to the label of your battery.

Original LANGFEITE connector

Each charger is presented with a close-up photo of the original LANGFEITE four-contact connector. Fixed current models use this socket. The 10A and 15A adjustables are accompanied by the supplied extension: charger-side input LP16 and two original LANGFEITE outputs on the scooter side.

The C2 10,4 Ah and Cayman 13 Ah are available with chargers 2A and 4A. The C5 and Cayman S are available in 2A and 5A. The charger C1 10A is reserved exclusively for the battery 36 Ah; for the C1 26 Ah, choose the 2A or the 5A.

Standard, fast or adjustable: which charging choose?

The 2A or 3A versions are suitable for longer periods of time. 4A and 5A versions reduce the estimated time. Adjustable chargers allow the current to be adjusted by a wheel: lower it for a slower charging, or increase it when you need to go back earlier. The maximum voltage remains fixed.

The adjustable 60V and 72V versions offer 3A to 10A. The adjustable 84V version rises from 3A to 15A. The double port extension divides the total current between the two branches; it is not the maximum current on each output.

Active Ventilation and Screen OLED

The Source’IT chargers in this range use active ventilation: the fan removes heat, limits its accumulation and helps to preserve components over the long term. Adjustable versions have a OLED display to track load information.

Frequently Asked Questions

Does a charger with output 84V fit a battery 84V?

No. In this range, a 84V output is for nominal batteries 72V. Models with nominal battery 84V require an output 96,6V.

How are the charging times calculated?

The Ah capacity is divided by the current in A, then rounded to the lower quarter hour. This is an estimate, not a measured duration. For example, 40 Ah to 5A gives about 8 h; at 10A, about 4 h.

How to identify the right connector?

Compare your socket with the close-up in each plug. If in doubt, send the template and a photo of the plug to contact@source-it.fr.

Source’IT warranty and support

Warranty 2 years. Shipment within 24/48 h from France. Also find all chargers for electric scooters.