SOURCE’IT · CHARGING SPECIALIST

LANGFEITE C1 chargers

Find the charger that suits your needs and charging routine.

Chargers for LANGFEITE C1: battery 60V 26 or 36 AhThis collection brings together the Source’IT chargers for the LANGFEITE C1 equipped with a lithium-ion battery 60V (16S). The corresponding maximum charge voltage is 67,2V. Several ...

Learn more
Stock in FranceSubject to model availability
Delivery in 1 to 10 daysDepending on the delivery method
Flexible payment optionsPay in instalments with Klarna
Technical adviceBy email or phone
Check compatibilityUnsure about the voltage or connector?

3 products

NEED A HAND?

Let us help you choose your charger.

Send us your device model and a photo of the connector. We will help you check voltage and compatibility before you buy.

Check compatibility

Chargers for LANGFEITE C1: battery 60V 26 or 36 Ah

This collection brings together the Source’IT chargers for the LANGFEITE C1 equipped with a lithium-ion battery 60V (16S). The corresponding maximum charge voltage is 67,2V. Several capacities exist depending on the version; the estimates below distinguish each battery.

Choose your charging speed

The standard version is suitable when you have several hours. Higher currents reduce the estimated charging time, with the same final voltage for your battery.

These time periods are estimates calculated by dividing Ah capacity by A current, rounded to the lower quarter of an hour. They do not correspond to measured times; the initial load level, the temperature and the battery condition may vary the actual time.

The original connector LANGFEITE in photo

Each plug has a detailed view of the original LANGFEITE connector with four contacts. Compare this photo with your socket. The adjustable charger 10A is associated with the extension provided: input LP16 on the charger side, two original outputs LANGFEITE on the scooter side. Both outputs connect to both ports to distribute the total current.

Adjustable current only for C1 36 Ah

The 10A charger is compatible only with the C1 battery-equipped 60V 36 Ah. For the C1 26 Ah, choose the 2A or 5A.

The 10A version has a wheel to adjust the current from 3A to 10A. You can decrease the intensity if you have time, or increase it for a faster charging between two runs. The maximum voltage of 67,2V remains unchanged. The OLED screen displays the load information.

Active breakdown of chargers Source’IT

The fan removes heat generated during the charging and limits its accumulation in the housing. This active cooling helps to preserve the components over the long term. Place the charger in a clear place to allow air to flow.

Frequently asked questions about charging the LANGFEITE C1

Which output voltage to choose?

For the 60V version described here, choose a 67,2V output. The nominal battery voltage and the charge voltage are not the same.

Which charger allows you to recharge faster?

With the same capacity, increasing the current reduces the estimated time. The comparative distinguishes the versions actually proposed in this collection.

Does battery capacity change the choice of voltage?

The Ah capacity is used to estimate the duration. The voltage choice depends on the electrical configuration of the battery. Also check the connector and version of your scooter.

Find all LANGFEITE chargers and chargers for electric scooters.

Warranty, shipping, and support

  • Warranty 2 years
  • Shipping within 24/48 hours from France

To check your version, write to contact@source-it.fr specifying the model and attaching a photo of the battery label and the socket.

Photos are not contractually binding – Source’IT.