Standard charger isinwheel S9 Max 36V-42V 2A

Standard charger isinwheel S9 Max – 36V (42V – 2A) – Active ventilation

This charger Source’IT 2A for isinwheel S9 Max delivers 42V output for the version equipped with a lithium-ion battery 36V (10S). Its active ventilation evacuates heat during the charge.

It uses the original isinwheel jack connector presented on the photos to branch to the corresponding port of your scooter.

This standard version is suitable as a replacement charger or as a second charger to keep a copy at home or in your workplace.

The plastic housing and the fan allow to dissipate the heat produced during the charging; leave the grids unobstructed.

Technical specifications

• Output voltage: 42V CC
• charging current: 2A
• Battery: lithium-ion 36V (10S) — 10 or 10,4 Ah depending on version
• Model: isinwheel S9 Max, configuration 36V
• Connector: original connector isinwheel jack
• Case: plastic
• Cooling: Active Cooling
• Estimated charging time : 10 Ah : approximately 5 h ; 10,4 Ah : approximately 5 h
• Contents: charger Source’IT and power cord

A charger suitable for l,isinwheel S9 Max

The nominal voltage 36V of the battery is distinct from its maximum charging voltage 42V. This charger is provided for this lithium-ion configuration and for the jack connector shown in the second photo. Check these two features if your scooter has the same name but belongs to another version.

The advantages of this 2A version

• Standard charging with battery-adapted output 36V
• Original connector isinwheel visible in close-up
• Active ventilation to limit heat accumulation
• Plastic casing
• Use as replacement or second charger
• Warranty 2 years

Compare chargers for l,isinwheel S9 Max

• Standard 2A charger — 10 Ah : approximately 5 h ; 10,4 Ah : approximately 5 h.

The time periods shown are estimates calculated from the battery capacity divided by the charger current, rounded to the lower quarter of an hour. The initial charge level, the temperature and the state of the battery may change the actual time.

Find it isinwheel S9 Max charger collection and range isinwheel.

Safety and reliability

Use this charger with the intended battery 36V and connector. Active ventilation helps to preserve the components by evacuating internal heat. Place the housing in a dry and clear place, without covering the openings.

FAQ – Charger isinwheel S9 Max 36V 2A

Is it compatible with my model?

This plug concerns the isinwheel S9 Max equipped with a lithium-ion 36V battery and the jack connector presented. Compare your equipment with these indications.

How long does charging take?

10 Ah: about 5 h; 10,4 Ah: about 5 h. This is an estimate for the indicated capacity, not a measured duration.

Does the charger have a fan?

Yes. Its active ventilation removes heat during loading and limits its accumulation in the housing.

Can it be used as a second charger?

Yes, for the configuration described on this sheet. You can keep a charger on each of your usual places.

Warranty, shipping, and support

• Warranty 2 years
• Shipping within 24/48 hours from France

Need to check your version? Write to contact@source-it.fr specifying the model and attaching a photo of the charge port and battery label.

Photos are not contractually binding – Source’IT.