SOURCE’IT · CHARGING SPECIALIST

Ausom F1 MAX Chargers

Find the charger that suits your needs and charging routine.

Chargers for Ausom F1 Max 60V electric scootersThis collection gathers Source’IT chargers for the Ausom F1 Max: 2A standard, 5A ultra-fast. Whether you are looking for a replacement charger or faster charging, compare the versions b...

Learn more
Stock in FranceSubject to model availability
Delivery in 1 to 10 daysDepending on the delivery method
Flexible payment optionsPay in instalments with Klarna
Technical adviceBy email or phone
Check compatibilityUnsure about the voltage or connector?

2 products

NEED A HAND?

Let us help you choose your charger.

Send us your device model and a photo of the connector. We will help you check voltage and compatibility before you buy.

Check compatibility

Chargers for Ausom F1 Max 60V electric scooters

This collection gathers Source’IT chargers for the Ausom F1 Max: 2A standard, 5A ultra-fast. Whether you are looking for a replacement charger or faster charging, compare the versions based on your scooter's battery and the connector shown in the photos.

The Ausom F1 Max stands out in this range due to its 60V 20.8 Ah lithium-ion battery. It requires a charging output of 67.2V: the 54.6V chargers for the L1 and L2 series or the 58.8V chargers for the DT2 Pro and SR1 do not match this configuration.

Batteries and configurations concerned

  • Ausom F1 Max: 60V 20.8 Ah lithium-ion battery (1248 Wh).

The batteries in this selection are of the 60V class, with a 16S lithium-ion architecture. Their maximum charging voltage is 67.2V. The capacity in Ah specifically determines the time required for a full charge: a battery with a higher capacity requires more time with the same charger.

Which charger to choose for the Ausom F1 Max?

  • 2A standard: suitable for standard charging, as a replacement charger, or as an extra unit for another location. Plastic casing, 67.2V output, and Active Cooling.
  • 5A ultra-fast: the version with the highest current in this selection, to shorten charging time compared to the 2A. Aluminum casing, 67.2V output, and Active Cooling.

Estimated charging times by battery and power

Ausom F1 Max – 20.8 Ah

  • 2A standard: ≈ 10 h 15
  • 5A ultra-fast: ≈ 4 h

These durations are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and condition of the battery will cause the actual time to vary.

Original connector and compatibility

The products in this collection use the original red 3-pin Ausom connector shown in their photos. The charging voltage and the connector must both match your scooter. A 60V battery or a visually similar plug are not, on their own, sufficient to confirm the wiring.

Choose your version based on its exact model and its original battery. Not all Ausom families share the same voltage or the same connector: the brand page allows you to find the suitable selection.

Active cooling and charger casing

The chargers in this collection are equipped with active cooling that promotes efficient heat dissipation during long charging sessions. The type of casing is detailed on each product page: this refers to the charger's casing, which is distinct from the scooter's battery casing.

The 2A versions come in a plastic casing; the 5A comes in an aluminum casing. All are equipped with Active Cooling.

FAQ – Choosing an Ausom F1 Max charger

Why a 67.2V charger for a 60V battery?

The 60V value refers to the nominal voltage class of the battery. The 67.2V value is its maximum charging voltage in a 16S lithium-ion architecture. The product pages specify both values to facilitate your choice.

Does the fast charger change the range?

The higher current shortens the charging time. It does not change the Ah capacity of the battery or its range when fully charged; the latter also depends on how the scooter is used.

Do all batteries in the range require the same time?

No. The capacity and the chosen current determine the estimated duration. Find your model and its capacity in the charging time list, then consult the page for the desired power.

Can the charger be used as a spare?

Yes, to keep one charger at home and another at a different location. Simultaneous charging with two chargers requires verifying the ports and the total current accepted by your configuration.

How to check the plug before purchase?

Compare the port on your scooter to the original red 3-pin Ausom connector visible on the product pages. If in doubt, our support team can verify your model based on photos and battery information.

Find other Ausom chargers

Consult the collection of chargers for Ausom electric scooters to find other models, voltages, and connectors offered by Source’IT.

Warranty, shipping, and support

  • 2-year warranty on the Source’IT charger.
  • Shipping within 24/48 hours from France.

Need a compatibility check? Write to contact@source-it.fr with the exact model, a photo of the charging port, and the battery information.

Photos non-contractual – Source’IT.