
Advice from Source’it
Call us on 06 49 95 09 76 or email us at contact@source-it.fr.
You can also contact us on WhatsApp.
TECHNICAL DESCRIPTION
Sur-Ron Light Bee Custom 72V–84V Adjustable Charger – 15A or 20A
This 72V–84V adjustable charger for Sur-Ron Light Bee Custom is designed for bikes prepared or modified with a 72V (20S) lithium-ion battery with an end-of-charge voltage of 84V. Two power levels are available: a version adjustable from 3A to 15A and an ultra-fast version adjustable from 3A to 20A.
Thanks to the adjustment dial, you can adapt the current to your needs: gentle charging at low intensity when time permits, fast charging at 10A or 15A, and up to 20A with the ultra-fast version. The integrated screen displays the voltage, the selected current, and key charging information.
This product is reserved for 72V Custom batteries compatible with 84V charging. It is not compatible with the original Sur-Ron Light Bee 60V battery.
Choose the power and connector
- 15A version: adjustable current from 3A to 15A.
- 20A version: adjustable current from 3A to 20A for ultra-fast charging.
- Available connectors: Sur-Ron 3-pin LP20, 2-pin LP20, 4-pin LP20, Sur-Ron Supra, QS8, QS10, Talaria, XT60, XT90, or custom connector.
Each connector choice is illustrated by the photo associated with its variant. For the Custom option, send a clear photo of your plug and the polarity information after ordering so that the configuration can be validated.
Technical specifications
- Battery nominal voltage: 72V
- Maximum output voltage: 84V
- Battery technology: 20S lithium-ion
- Adjustable current: 3A to 15A or 3A to 20A depending on the variant
- Adjustment: rotary dial
- Display: digital charge tracking screen
- Cooling: active ventilation and heat-dissipating aluminum casing
- Integrated protections: overvoltage, overcurrent, overload, short-circuit, reverse polarity, and overheating
- Power supply: 200–240V AC, 50/60Hz
- Connector: your choice from the variants
- HS Code: 850440
Approximate charging times
| Battery capacity | 15A version at full power | 20A version at full power |
|---|---|---|
| 40Ah | ≈ 2h45 to 3h | ≈ 2h15 to 2h30 |
| 50Ah | ≈ 3h30 to 4h | ≈ 2h45 to 3h |
| 60Ah | ≈ 4h15 to 4h45 | ≈ 3h15 to 3h30 |
These durations are indicative. They vary according to the discharge level, temperature, actual battery capacity, and the final balancing phase managed by the BMS.
For Custom batteries and high-performance preparations
This charger is suitable for Sur-Ron Light Bee bikes equipped with a 72V Custom battery, particularly in preparations using a Torp, ASI, Nucular, SinTech controller, or another high-performance configuration. Compatibility primarily depends on the pack voltage, the charging current accepted by the BMS, the wiring, and the connector.
Before using the 15A or 20A version, verify that the BMS, charging port, fuse, and cable gauge support the selected intensity. If the battery accepts a lower current, set the charger to an appropriate value.
Why choose a 15A or 20A adjustable charger?
- One charger for several charging rhythms: low intensity for daily use, maximum power when you want to get back on the road quickly.
- 15A version: a good balance between charging speed and available power.
- 20A version: ultra-fast charging for batteries and installations rated for 20A.
- Control screen: clear viewing of voltage and current.
- Choice of connector: ten configurations available directly in the variants.
FAQ – Sur-Ron Light Bee Custom 72V–84V Charger
Does this charger work with an original Sur-Ron Light Bee?
No. It is designed for a 72V 20S lithium-ion Custom battery with an 84V end-of-charge voltage. The original 60V battery is not compatible.
What is the difference between the 15A and 20A versions?
The 15A version is adjustable from 3A to 15A. The 20A version is adjustable from 3A to 20A and reduces charging time further when the battery and BMS accept this current.
Is the charging current adjustable?
Yes. The dial allows you to select the intensity within the range of the chosen version. The screen displays the current applied during charging.
How do I choose the right connector?
Select the connector installed on your Custom battery from the offered variants. Each variant has its own photo. The Custom option allows you to request another type of connector after technical validation.
Can I charge a 50Ah battery at 20A?
Yes, if the battery manufacturer and the BMS authorize a 20A charge, and if the charging port, wiring, and fuse are dimensioned for this intensity. When in doubt, use a lower setting.
Warranty and shipping
- Warranty: 2 years
- Quality control: charger tested before shipment
- Shipping: from France
- Support: assistance with choosing power and connector
*Photos are not contractual – Source'IT.
The right charger for your battery.
Unsure about the voltage or connector? Send us the references of your battery and old charger.
Dualtron
Teverun
Nami
Xiaomi
Ninebot & Segway
Navee
Awesome
Kukirin
Joyor
Urban Glide
BOYUEDA
Outfit of the day
Kamikaze
Futecher & Bluetran
Rovoron
Hello
Vsett
E-twow
Aovo
Inokim
Neither
Speedway
SXT
IsinWheel
Wispeed
Microphone
Speedtrott
Zero
Zosh
GLOBAL 3T
TROTRX
Moovway
Pure Air
Hero
Review
Mobygum
Wegoboard
Inoë
Laotia
FLJ
Nanorobot
Renault
Kuickwheel
Yadea
Twair
Pager
Inmotion
Sur-Ron
Talaria
E-Ride Pro
Arctic Leopard
Super Soco
Dayi E-ODIN
Wayscral
Pink Mobility
Scooter Rider
Horwin
Golden Lion
QJ MOTORS
DOOHAN
CRZ
EUROCKA
TROMOX
2Twenty
Initiative
Moped
Stromer electric bike
Fiido
DUOTTS
ENGWE
Chargers for license-free cars
Lead/AGM Charger
Adjustable Chargers
iPhone Chargers
IN MOTION