Arctic Leopard XE PRO S 72V-84V 10A Charger (Original Battery)

Arctic Leopard XE PRO S Charger – 72V (84V) – 10A

The 72V – 84V 10A charger for Arctic Leopard XE PRO S is specially designed for the Arctic Leopard XE PRO S equipped with its 74V Arctic Leopard (72V) 60Ah battery. It provides a stable, secure, and perfectly adapted charge for this electric motorcycle's battery.

With a current of 10A, this charger is an ideal solution for daily use. It allows the large 60Ah battery to be charged in approximately 6 to 6.5 hours.

Thanks to its aluminum housing with active cooling and high-quality electronics, the charger delivers a regulated end-of-charge voltage of 84V, adapted to the 74V Arctic Leopard (72V) battery.

The charger is directly equipped with the original Arctic Leopard XE PRO S connector to allow direct connection to the motorcycle without any adapters or modifications.

🏍️ Compatible Arctic Leopard Motorcycle

• Arctic Leopard XE PRO S – 74V Arctic Leopard (72V) 60Ah lithium-ion battery

This charger delivers an end-of-charge voltage of 84V and a charging current of 10A.

⚡ 84V charging and battery display

For Arctic Leopards equipped with a 74V battery, Source’it chargers limit the charge to 84V, or 4.2V per cell: the standard full-charge voltage for a 20S lithium-ion battery using 4.2V cells. The original charger goes up to 86V, or 4.3V per cell. Our choice of a lower voltage aims to preserve the battery's longevity. The bike may then display approximately 90%, without this necessarily corresponding to 10% less range: the relationship between voltage and stored energy is not linear, and the display depends on the gauge calibration. Charging to 84V is therefore a compromise between range and battery preservation. If you wish to charge to 86V, a charger can be adapted upon request, subject to compatibility with your battery.

🔧 Technical specifications

• Charger rated voltage: 72V
• Output / end-of-charge voltage: 84V
• Charging current: 10A
• Compatible battery type: 74V Arctic Leopard (72V) lithium-ion
• Battery capacity: 60Ah
• Connectors: original Arctic Leopard XE PRO S connector
• Cooling: active – fan + aluminum heatsink housing
• Protections: overvoltage, overcurrent, overload, short-circuit, polarity reversal, and overheating

⏱️ Estimated charging time

• Arctic Leopard XE PRO S – 74V Arctic Leopard (72V) 60Ah battery
  → 10A: approximately 6h to 6h30

Charging time is provided for information only and may vary depending on the initial discharge level, temperature, battery condition, and the final charging and BMS balancing phase.

💡 Why choose this 10A Arctic Leopard XE PRO S charger?

✔️ 10A Charge: excellent compromise for daily use.
✔️ 72V – 84V Charger: end-of-charge voltage regulated at 84V.
✔️ Compatible battery: 74V Arctic Leopard (72V) 60Ah.
✔️ Reduced charging time: approximately 6 to 6.5 hours for a heavily discharged 60Ah battery.
✔️ Original Arctic Leopard connector: no motorcycle modification required.
✔️ Active cooling: fan and aluminum heatsink housing.
✔️ Protected electronics: protection against major electrical faults.
✔️ Plug & play: directly compatible with the Arctic Leopard XE PRO S.

🔌 Original Arctic Leopard XE PRO S connector

The charger is directly equipped with the original Arctic Leopard XE PRO S connector.

No adapters, connector replacements, or electrical harness modifications are required. The charger is delivered ready to plug into the motorcycle.

🌡️ Active cooling and aluminum housing

The charger features active cooling combined with an aluminum heatsink housing. This design allows for the efficient dissipation of heat generated during several hours of charging.

🔒 Safety and compatibility

Is this 10A charger suitable for a 60Ah battery?
Yes. A 10A charge represents approximately 0.17C for a 60Ah battery, offering a good balance between charging speed and charging intensity.

The charger integrates several electronic protections:

• Overvoltage protection
• Overcurrent protection
• Overload protection
• Short-circuit protection
• Polarity reversal protection
• Overheating protection

Tip: after intensive use of your Arctic Leopard XE PRO S, allow the battery to return to a normal temperature before starting to charge.

❓ FAQ – Arctic Leopard XE PRO S 72V (84V) 10A Charger

📦 Warranty & Shipping

• 🚚 Fast shipping from France
• 🇪🇺 Delivery in France and throughout Europe
• 🛡️ 2-year warranty
• 🔧 Each charger is individually tested before shipment
• 🔌 Original Arctic Leopard XE PRO S connector

📩 Need advice or compatibility verification? Contact us directly.

*Non-binding photos – Source'IT.