Arctic Leopard XE PRO S 72V-84V 20A Ultra-Fast Charger (Original Battery)

Arctic Leopard XE PRO S Adjustable Ultra-Fast Charger – 72V (84V) – 3A to 20A with OLED screen

The 72V – 3A to 20A adjustable ultra-fast charger for Arctic Leopard XE PRO S is specially designed for the Arctic Leopard XE PRO S equipped with its 74V Arctic Leopard (72V) 60Ah battery. It provides a stable, safe, and extremely fast charge while allowing you to choose the exact charging intensity based on your needs.

When you charge overnight and are not in a rush, you can charge quietly at 3A or 5A. For a faster charge, you can select 10A or 15A, and when you want to minimize your bike's downtime, you can go up to 20A.

This 3A to 20A adjustment range allows you to use a single charger for both daily low-intensity charging and ultra-fast charging.

Thanks to its aluminum housing with active cooling and high-power electronics, this charger delivers a perfectly regulated end-of-charge voltage of 84V, adapted to the 74V Arctic Leopard (72V) battery.

Its integrated OLED screen displays the charged capacity, battery voltage, and selected current in real time. Settings are adjusted via a rotary dial, which is simple and precise.

🏍️ Compatible Arctic Leopard motorcycle

• Arctic Leopard XE PRO S – 74V Arctic Leopard (72V) 60Ah lithium-ion battery

This 72V charger is configured with an end-of-charge voltage of 84V, an adjustable current from 3A to 20A, and the original Arctic Leopard XE PRO S connector.

🔧 Technical specifications

• Charger nominal voltage: 72V
• Output / end-of-charge voltage: 84V
• Charging current: adjustable from 3A to 20A
• Maximum power: approximately 1,680W
• Adjustment: rotary dial
• Display: OLED screen (charged capacity, voltage, current)
• Compatible battery type: 74V Arctic Leopard (72V) lithium-ion
• Battery capacity: 60Ah
• Connectivity: original Arctic Leopard XE PRO S connector
• Cooling: active – fan + aluminum heatsink housing
• Protections: overvoltage, overcurrent, overload, short circuit, polarity reversal, and overheating

⏱️ Estimated charging time

• Arctic Leopard XE PRO S – 74V Arctic Leopard (72V) 60Ah battery
  → 3A: approximately 20h to 21h
  → 5A: approximately 12h to 13h
  → 10A: approximately 6h to 6h30
  → 15A: approximately 4h to 4h30
  → 20A: approximately 3h

Charging times may vary depending on the initial discharge level, temperature, battery condition, and the final charging and BMS balancing phase.

⚡ Ultra-fast charging up to 20A

At its maximum power of 20A, this charger significantly reduces the charging time for the Arctic Leopard XE PRO S 60Ah battery.

A 20A charge represents approximately 0.33C for a 60Ah battery. The theoretical ratio between the 60Ah capacity and 20A current is only 3 hours. In practice, allow for approximately 3h to 3h30 when taking the final charging and balancing phase into account.

The main advantage remains its fully adjustable power: you do not have to use 20A for every charge. You can select a lower intensity when you have more time available.

⚠️ A charging voltage adapted to your battery

For Arctic Leopard bikes equipped with a 74V battery, Source’it chargers limit the charge to 84V, or 4.2V per cell: the standard full-charge voltage for a 20S lithium-ion battery using 4.2V cells. The original charger reaches 86V, or 4.3V per cell. Our choice of a lower voltage is aimed at preserving battery longevity. The motorcycle may then display approximately 90%, without this necessarily corresponding to 10% less range: the relationship between voltage and stored energy is not linear, and the display depends on the gauge calibration. Charging at 84V therefore constitutes a compromise between range and battery preservation. If you would like a charge at 86V, a charger can be adapted upon request, subject to compatibility with your battery.

💡 Why choose this Arctic Leopard XE PRO S ultra-fast charger?

✔️ Adjustable current: from 3A up to 20A.
✔️ Ultra-fast charging: approximately 3h to 3h30 at full power.
✔️ Intelligent setting: 3A (slow), 5A (standard), 10A (intermediate), 15A (fast), 20A (ultra-fast).
✔️ Battery preservation: adjust the power according to your usage.
✔️ OLED screen: real-time monitoring of key charging information.
✔️ Adjustment dial: simple and precise current selection.
✔️ Original Arctic Leopard connector: no modification of the motorcycle required.
✔️ Active cooling: ventilation and aluminum heatsink housing.
✔️ Voltage regulated at 84V: adapted to the 74V Arctic Leopard (72V) battery.

🖥️ OLED screen and 3A to 20A adjustment

The charger features an OLED screen that allows you to monitor key information during charging. Its rotary dial makes it easy to adjust the current between 3A and 20A.

This allows you to prioritize a slow charge at 3A or 5A, use 10A for an intermediate charge, 15A for a fast charge, or select up to 20A when you want to get your Arctic Leopard XE PRO S back as quickly as possible.

🔌 Original Arctic Leopard XE PRO S connector

The charger comes directly equipped with the original Arctic Leopard XE PRO S connector.

No adapter, connector replacement, or modification of the motorcycle's electrical harness is required. The charger is delivered ready to plug in.

🌡️ Active cooling and aluminum housing

With a power output of up to approximately 1,680W at 20A, effective thermal management is essential. The charger combines an aluminum heatsink housing with active cooling to efficiently dissipate the heat generated by the power electronics during high-intensity charging sessions.

🔒 Safety and compatibility

Is this charger suitable for the Arctic Leopard XE PRO S 60Ah battery?
At its maximum power, a 20A charge represents approximately 0.33C for a 60Ah battery. The current can also be reduced down to 3A for a slower charge when time permits.

The charger incorporates several electronic protections:

• Overvoltage protection
• Overcurrent protection
• Overload protection
• Short-circuit protection
• Polarity reversal protection
• Overheating protection

Tip: after intensive use of your Arctic Leopard XE PRO S, allow the battery to return to a normal temperature before performing a high-intensity charge, especially at 20A.

❓ FAQ – Arctic Leopard XE PRO S 72V (84V) adjustable 20A ultra-fast charger

📦 Warranty & Shipping

• 🚚 Fast shipping from France
• 🇪🇺 Delivery in France and throughout Europe
• 🛡️ 2-year warranty
• 🔧 Each charger is individually tested before shipment
• 🔌 Original Arctic Leopard XE PRO S connector

📩 Need advice or a compatibility check?

Contact us directly.

*Photos are not contractual – Source'IT.