
Advice from Source’it
Call us on 06 49 95 09 76 or email us at contact@source-it.fr.
You can also contact us on WhatsApp.
TECHNICAL DESCRIPTION
Ausom Go Soul 2 and Go Soul 2 Pro Standard Charger – 48V (54.6V – 2A) – Active Cooling
This standard 2A charger for the Ausom Go Soul 2 and Go Soul 2 Pro delivers a 54.6V output. It is designed for the 48V (13S) original lithium-ion battery configurations detailed below.
It uses the original Ausom RCA connector shown in the photos, in order to plug directly into the corresponding charging port on your electric scooter.
Its 2A current is suitable for standard charging and serves as a replacement solution or an additional charger to keep at another charging location.
This charger is equipped with active cooling to promote efficient heat dissipation during long charging sessions. This version features a plastic housing.
Technical specifications
- Output voltage: 54.6V DC.
- Charging current: 2A.
- Battery type: 48V (13S) lithium-ion.
- Connector: Original Ausom RCA connector.
- Housing: Plastic.
- Cooling: Active cooling.
- Estimated charging time Ausom Go Soul 2 (13 Ah): ≈ 6.5 h.
- Estimated charging time Ausom Go Soul 2 Pro (18 Ah): ≈ 9 h.
- Weight: 0.4 kg.
- Integrated protections: overvoltage, overcurrent, overheating, and short-circuit.
- LED indicator: red = charging / green = charge complete.
- Contents: Source’IT charger and power cord.
A charger adapted to the Ausom Go Soul 2 and Go Soul 2 Pro
The Ausom Go Soul 2 uses a 48V 13 Ah battery, and the Go Soul 2 Pro uses a 48V 18 Ah battery. These plugs correspond to the versions equipped with the Ausom RCA connector shown in the photos, with a final charging voltage of 54.6V.
- Ausom Go Soul 2: 48V 13 Ah lithium-ion battery (624 Wh).
- Ausom Go Soul 2 Pro: 48V 18 Ah lithium-ion battery (864 Wh).
The 48V nominal voltage refers to the battery; the 54.6V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This plug targets the original configurations listed, with the photographed connector.
The advantages of this 2A version
- Output regulated at 54.6V for the corresponding 48V configuration.
- Original Ausom RCA connector visible in the photos.
- Standard charging to replace your charger or have an extra one on hand.
- Active cooling to dissipate internal heat.
- Plastic housing and integrated electronic protections.
- 2-year warranty and Source’IT technical support.
Comparing Ausom Go Soul 2 and Go Soul 2 Pro chargers
The versions in this family deliver the same final voltage of 54.6V. The products are distinguished by their charging current, housing, and estimated time. The 2A is suitable for standard charging, the 4A for fast charging, and the 5A for shorter charging times.
Ausom Go Soul 2 – 13 Ah
- 2A standard: ≈ 6.5 h
- 4A fast: ≈ 3.25 h
- 5A ultra-fast: ≈ 2.5 h
Ausom Go Soul 2 Pro – 18 Ah
- 2A standard: ≈ 9 h
- 4A fast: ≈ 4.5 h
- 5A ultra-fast: ≈ 3.5 h
These durations are estimates for a 0 to 100% charge using a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. Starting charge level, temperature, and battery condition will cause the actual time to vary.
- Ausom Go Soul 2 and Go Soul 2 Pro 48V – 54.6V 2A standard charger
- Ausom Go Soul 2 and Go Soul 2 Pro 48V – 54.6V 4A fast charger
- Ausom Go Soul 2 and Go Soul 2 Pro 48V – 54.6V 5A ultra-fast charger
Find all Ausom chargers to compare versions and check their photos.
Safety and reliability
The 54.6V regulation and electronic protections support the charging of the corresponding 48V battery. Active cooling cools the charger; it does not cool the battery directly. Keep openings clear and allow a hot battery to cool down after use.
FAQ – Ausom Go Soul 2 / Pro 2A Charger
Is this charger suitable for my scooter?
It corresponds to the models and batteries listed in the compatibility section, with the photographed original Ausom RCA connector. Check the exact model, voltage, and plug of your version before choosing.
How long does charging take?
Ausom Go Soul 2 13 Ah: approximately 6.5 hours with this 2A charger. Ausom Go Soul 2 Pro 18 Ah: approximately 9 hours with this 2A charger. A partially charged battery takes less time.
Does the charger have a fan?
Yes. This 2A version has active cooling and a plastic housing. The fan may be audible during charging.
Can I keep it as a second charger?
Yes, to have a charger at another charging location. Simultaneous use of two chargers depends on the ports and the total current accepted by the scooter version; it cannot be assumed simply by the presence of two sockets.
What is the difference compared to other power levels?
The 2A is the standard version of this family. The list and links above allow you to compare the other versions for your battery’s exact capacity.
Warranty, shipping, and support
- 2-year warranty on the Source’IT charger.
- Shipping within 24/48 hours from France.
Need a compatibility check? Email contact@source-it.fr with the exact model, a photo of the charging port, and the battery information.
Photos are not contractual – Source’IT.
The right charger for your battery.
Unsure about the voltage or connector? Send us the references of your battery and old charger.
Dualtron
Teverun
Nami
Xiaomi
Ninebot & Segway
Navee
Awesome
Kukirin
Joyor
Urban Glide
BOYUEDA
Outfit of the day
Kamikaze
Futecher & Bluetran
Rovoron
Hello
Vsett
E-twow
Aovo
Inokim
Neither
Speedway
SXT
IsinWheel
Wispeed
Microphone
Speedtrott
Zero
Zosh
GLOBAL 3T
TROTRX
Moovway
Pure Air
Hero
Review
Mobygum
Wegoboard
Inoë
Laotia
FLJ
Nanorobot
Renault
Kuickwheel
Yadea
Twair
Pager
Inmotion
Sur-Ron
Talaria
E-Ride Pro
Arctic Leopard
Super Soco
Dayi E-ODIN
Wayscral
Pink Mobility
Scooter Rider
Horwin
Golden Lion
QJ MOTORS
DOOHAN
CRZ
EUROCKA
TROMOX
2Twenty
Initiative
Moped
Stromer electric bike
Fiido
DUOTTS
ENGWE
Chargers for license-free cars
Lead/AGM Charger
Adjustable Chargers
iPhone Chargers
IN MOTION