Ausom SR1 52V - 58.8V 2A Charger

Ausom SR1 Standard Charger – 52V (58.8V – 2A) – Active Cooling

This 2A standard charger for the Ausom SR1 delivers a 58.8V output. It is designed for the original 52V (14S) lithium-ion battery configurations detailed below.

It uses the original red 3-pin Ausom connector shown in the photos, in order to plug directly into the corresponding charging port of your electric scooter.

Its 2A current is suitable for standard charging and serves as a replacement solution or an additional charger to keep at another charging location.

This charger is equipped with active cooling that promotes efficient heat dissipation during long charging sessions. This version has a plastic casing.

Technical specifications

• Output voltage: 58.8V DC.
• Charging current: 2A.
• Battery type: 52V (14S) lithium-ion.
• Connector: original red 3-pin Ausom connector.
• Casing: plastic.
• Cooling: Active cooling.
• Estimated charging time for Ausom SR1 (20.8 Ah): ≈ 10 hrs 15 mins.
• Weight: 0.4 kg.
• Integrated protections: overvoltage, overcurrent, overheating, and short-circuit.
• LED indicator: red = charging / green = charge complete.
• Contents: Source’IT charger and power cord.

A charger adapted to the Ausom SR1

The Ausom SR1 is equipped with a 52V 20.8 Ah lithium-ion battery. To replace its charger or to have a faster solution, this selection brings together the 2A, 4A, and 5A versions with a regulated 58.8V output.

• Ausom SR1: 52V 20.8 Ah lithium-ion battery (1081.6 Wh).

The 52V nominal voltage refers to the battery; the 58.8V voltage corresponds to its maximum charging voltage. The choice of charger also depends on the connector and its wiring. This product sheet is intended for the original configurations listed, with the photographed connector.

The advantages of this 2A version

• Regulated 58.8V output for the corresponding 52V configuration.
• Original red 3-pin Ausom connector visible in the photos.
• Standard charging to replace your charger or to have an extra unit.
• Active cooling to vent internal heat.
• Plastic casing and integrated electronic protections.
• 2-year warranty and Source’IT technical support.

Comparing Ausom SR1 chargers

The versions in this family deliver the same final voltage of 58.8V. The charging current, casing, and estimated duration distinguish the products. The 2A is suitable for standard charging, the 4A for fast charging, and the 5A for a shorter charge.

Ausom SR1 – 20.8 Ah

• 2A standard: ≈ 10 hrs 15 mins
• 4A fast: ≈ 5 hrs
• 5A ultra-fast: ≈ 4 hrs

These durations are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter-hour. The starting level, temperature, and condition of the battery will vary the actual time.

• Ausom SR1 52V Standard Charger – 58.8V 2A
• Ausom SR1 52V Fast Charger – 58.8V 4A
• Ausom SR1 52V Ultra-fast Charger – 58.8V 5A

Find all Ausom SR1 chargers to compare the versions and check their photos.

Safety and reliability

The 58.8V regulation and electronic protections accompany the charging of the corresponding 52V battery. Active cooling cools the charger; it does not directly cool the battery. Leave the openings unobstructed and allow a hot battery to cool down after use.

FAQ – Ausom SR1 2A Charger

Is this charger suitable for my scooter?

It corresponds to the models and batteries listed in the compatibility section, with the photographed original red 3-pin Ausom connector. Check the exact model, voltage, and plug of your version before choosing.

How long does the charge take?

Ausom SR1 20.8 Ah: approximately 10 hrs 15 mins with this 2A charger. A partially charged battery requires less time.

Does the charger have a fan?

Yes. This 2A version has Active Cooling and a plastic casing. The fan may be audible during charging.

Can I keep it as a second charger?

Yes, to have a charger at another charging location. Simultaneous use of two chargers depends on the ports and the total current accepted by the scooter version; it cannot be assumed simply because there are two sockets.

What is the difference compared to other power levels?

The 2A is the standard version of this family. The list and links above allow you to compare the other versions for your battery's exact capacity.

Warranty, shipping, and support

• 2-year warranty on the Source’IT charger.
• Shipping within 24/48 hours from France.

Need a compatibility check? Write to contact@source-it.fr with the exact model, a photo of the charging port, and the battery information.

Photos non-contractual – Source’IT.