ENGWE Engine X Electric Bike Charger 48V-54.6V 2A

ENGWE Engine X Electric Bike Charger – 48V (54.6V – 2A)

This standard 2A charger for the ENGWE Engine X delivers a 54.6V output and is designed for this electric bike equipped with its original 48V 13 Ah lithium-ion battery.

It is available with either the 8mm RCA connector or the 5.5mm Jack connector, as shown in the photos. Select the variant that exactly matches your bike's charging port.

With its 2A charging current, this model is suitable as a replacement or secondary charger, with an estimated time of about 6 hours and 30 minutes for a 0 to 100% charge of the reference battery.

Its compact plastic housing ensures steady and silent charging.

Technical specifications

• Output voltage: 54.6V DC (48V – 13S lithium-ion battery)
• Charging current: 2A
• Compatible battery: ENGWE Engine X – 48V 13 Ah
• Connector: 8mm RCA or 5.5mm Jack depending on the variant
• Estimated charging time: approx. 6h 30m from 0 to 100%
• Housing: plastic
• Cooling: Passive cooling
• Built-in protections: overload, overvoltage, overcurrent, overheating, and short-circuit
• LED indicator: red = charging in progress / green = charge complete
• Weight: 0.37 kg
• Included: Source’IT charger and power cord

Charger specially designed for the ENGWE Engine X

The ENGWE Engine X uses a 48V 13 Ah lithium-ion battery. Its maximum charging voltage is 54.6V.

The 8mm RCA and 5.5mm Jack variants use two different plugs. Compare your bike's port with the photo associated with each variant before ordering.

Benefits of the ENGWE Engine X 54.6V 2A Charger

• Dedicated compatibility with the ENGWE Engine X
• Two connector variants illustrated separately
• Voltage regulated at 54.6V
• Standard 2A charge – approx. 6h 30m
• Built-in electronic protections
• 2-year warranty
• Fast shipping within 24/48 hours from France

Available charging speeds

For the ENGWE Engine X, Source’IT offers:

• 2A Charger: approx. 6h 30m
• 4A Fast Charger: approx. 3h 30m

Times are estimates calculated based on the reference capacity. They vary depending on the discharge level, temperature, battery health, and current reduction at the end of the charge.

See all ENGWE Engine X chargers or the ENGWE charger collection.

Safety and reliability

The charger is calibrated for a 48V lithium-ion battery and delivers a stable maximum voltage of 54.6V. Its electronic protections monitor the charge throughout each cycle.

FAQ – ENGWE Engine X Electric Bike Charger 48V / 54.6V – 2A

Is this charger compatible with my ENGWE Engine X?

Yes, when used with the original 48V 13 Ah battery and the connector variant that matches your charging port.

Which connector should I choose?

Choose 8mm RCA for the round RCA plug or 5.5mm Jack for the cylindrical Jack plug. Each variant displays its own photo.

How long does a full charge take?

Allow approximately 6 hours and 30 minutes for a 0 to 100% charge for the reference battery.

Does the charger have a fan?

No. This 2A version uses passive cooling and operates silently.

Can I use it as a second charger?

Yes. It is suitable as a replacement or secondary charger.

Warranty and shipping

• Fast shipping within 24/48 hours from France
• 2-year warranty

Support

Need a compatibility check? Email us at contact@source-it.fr, specifying the bike model and attaching a photo of the plug.

Non-binding photos – Source’IT.