RAPID charger E ride PRO SS 2.5 and 3.0 72V-84V 15A (Original battery)

Adjustable Fast Charger for E-Ride Pro SS 2.5 and E-Ride Pro SS 3.0 – 72V-84V – 3A to 15A

This adjustable 72V – 3A to 15A fast charger is specifically designed for E-Ride Pro SS electric motorcycles equipped with original 72V (20S lithium-ion) batteries, including the E-Ride Pro SS 2.5 (72V 40Ah) and E-Ride Pro SS 3.0 (72V 50Ah) models.

Thanks to its adjustable current from 3A to 15A, this charger allows you to precisely adapt the charging power to your needs:

• ✔️ 3A or 5A for a gentler, more gradual charge
• ✔️ 10A to 15A to quickly regain range

The charger delivers a perfectly regulated 84V voltage, which is essential to ensure a complete, stable charge and optimal balancing of the 72V lithium-ion battery BMS.

Its ventilated aluminum charging block, combined with active cooling, effectively limits heat even during high-power charging.

The built-in OLED screen allows you to display in real-time:

• ✔️ Battery voltage
• ✔️ Charged capacity
• ✔️ Selected charging current

The intensity can be adjusted simply via a rotary knob.

🔧 Technical Specifications

• Output voltage: 84V (72V Li-ion battery – 20S)
• Charging current: Adjustable from 3A to 15A
• Adjustment: Rotary knob
• Display: OLED screen (voltage, capacity, current)
• Connectors: Original E-Ride Pro SS connector
• Compatibility: E-Ride Pro SS 2.5 / SS 3.0
• Battery type: 72V (20S) lithium-ion
• Cooling: Active ventilation – ventilated aluminum charging block
• Protections: Overcharge, overvoltage, short circuit, polarity reversal, overheating

⏱️ Estimated charging times

• E-Ride Pro SS 2.5 – 72V 40Ah battery
  → 3A: ≈ 13h
  → 5A: ≈ 8h
  → 10A: ≈ 4h
  → 15A: ≈ 2h45
• E-Ride Pro SS 3.0 – 72V 50Ah battery
  → 3A: ≈ 16h30
  → 5A: ≈ 10h
  → 10A: ≈ 5h
  → 15A: ≈ 3h30

Charging times may vary depending on temperature, battery condition, and the BMS final balancing phase.

💡 Why choose this E-Ride Pro adjustable fast charger?

✔️ Smart adjustment from 3A to 15A according to your needs.
✔️ Ultra-fast charging up to 15A.
✔️ Built-in OLED screen with real-time information.
✔️ Simple and precise adjustment knob.
✔️ Active ventilation to effectively limit heat.
✔️ Ventilated aluminum block to promote cooling.
✔️ Precisely regulated 84V voltage.
✔️ Premium upgrade from the original charger.

🔒 Safety and compatibility

Is the 15A adjustable fast charger safe for the battery?
Yes. The 72V 40Ah and 50Ah lithium-ion batteries in E-Ride Pro SS bikes perfectly support charging up to 15A with a properly regulated and ventilated charger.

Current adjustment also allows for a gentler 3A or 5A charge to prioritize battery longevity when you are not in a hurry.

Tip: Allow the battery to cool for 30 to 60 minutes after use before high-power charging.

❓ FAQ – E-Ride Pro SS 72V Adjustable Fast Charger

➡️ Is this charger compatible with E-Ride Pro SS 2.5 and 3.0?

Yes ✅ This charger is designed for the 72V (20S) lithium-ion batteries of the E-Ride Pro SS 2.5 (40Ah) and E-Ride Pro SS 3.0 (50Ah) models.

➡️ Why does the charger show 84V when the battery is 72V?

The 72V refers to the nominal voltage of the lithium-ion pack. A 20S battery requires a maximum voltage of 84V to reach a 100% charge.

➡️ Can I change the current during charging?

Yes. The rotary knob adjustment allows you to change the charging current to your needs, even while in use.

➡️ Does the charger get hot?

Very little, thanks to the active ventilation and the ventilated aluminum block, which effectively limit the internal temperature.

➡️ How long does it take to fully charge the battery?

Expect about 3 hours for a 72V 40Ah battery and about 3h45 for a 72V 50Ah battery in 15A mode.

📩 Need a compatibility check? Contact us directly.

*Photos are for illustrative purposes only.

Warranty: 2 years.