Nami Blast 60V-67.2V 10A Ultra-Fast Charger

Nami Blast 60V – 67.2V (3A to 10A) Adjustable Ultra-Fast Charger – Original Nami 2-pin Connector – OLED Screen + Dial

This adjustable 60V – 3A to 10A ultra-fast charger is specially designed for the Nami Blast electric scooter equipped with its 60V 29Ah lithium-ion battery. It delivers a precisely regulated voltage of 67.2V, corresponding to the maximum charging voltage of a 60V – 16S battery.

Thanks to its adjustable charging current from 3A to 10A, you can easily adapt the charging speed to your needs. When charging overnight or when you're not in a hurry, you can select a gentler charge at 3A or 5A. When you need to quickly regain battery life, you can increase the current up to 10A.

At full power, the charger can fully charge the 60V 29Ah battery of the Nami Blast in approximately 3 hours, about twice as fast as with a 5A charger.

Its integrated OLED screen allows real-time monitoring of the battery voltage, the selected charging current, and the charged capacity. The intensity is adjusted simply using a rotary dial.

The charger is directly equipped with the original Nami 2-pin connector matching the Nami Blast's charging port, without any adapter or modification.

---

🔧 Technical Specifications

• Output Voltage: 67.2V (60V – 16S lithium-ion battery)
• Charging Current: adjustable from 3A to 10A
• Adjustment: rotary dial
• Display: OLED screen (charged capacity, battery voltage, current)
• Compatible Battery: Nami Blast – 60V 29Ah
• Connector: original Nami 2-pin connector
• Battery Type: 60V lithium-ion (16S)
• Cooling: active ventilation – aluminum heat sink casing
• Integrated Protections: overcharge, overvoltage, overcurrent, short circuit, reverse polarity, and overheating

---

⏱️ Nami Blast 60V 29Ah Charging Times

• 3A: approximately 9h30 to 10h
• 5A: approximately 5h45 to 6h00
• 10A: approximately 3h00 to 3h15

Charging times are indicative and may vary slightly depending on the battery's discharge level, its temperature, and the final charging and balancing phase of the BMS.

---

🎛️ Adjust Charging Power to Your Needs

One of the main advantages of this charger is that it is not limited to a single intensity. You can adjust the charging current from 3A to 10A depending on the time you have.

• 3A: gentle charge when you have enough time
• 5A: fast charge, ideal for daily use
• 10A: ultra-fast charge when you want to quickly regain your range

Therefore, you are not obliged to always use the charger at its maximum power. A lower intensity can be selected overnight, while the 10A mode can be used when charging time is a priority.

---

💡 Why Choose the Source'IT 10A Adjustable Charger for Nami Blast?

• Adjustable current from 3A to 10A
• Full recharge in approximately 3 hours at 10A
• Original Nami 2-pin connector
• Integrated OLED screen with real-time charging information
• Simple and precise adjustment dial
• Active ventilation effectively limiting heating
• Aluminum casing promoting heat dissipation
• Precisely regulated voltage at 67.2V
• Complete electronic protections
• Individually tested product before shipment
• 2-year warranty

---

🔒 Safety and Reliability

This charger is designed for the Nami Blast's 60V 29Ah lithium-ion battery and delivers a precisely regulated maximum voltage of 67.2V.

The active ventilation cooling combined with the aluminum heat sink casing helps maintain a stable operating temperature, especially during high-power charging.

The charger also includes several electronic protections against overvoltages, overcurrents, overcharges, short circuits, reverse polarity, and overheating.

Tip: after intensive use of the scooter, allow the battery to cool down before starting a high-intensity charge.

---

❓ FAQ – Nami Blast 60V 29Ah Adjustable Ultra-Fast Charger

➡️ Is this charger compatible with my Nami Blast?

Yes. It is specially designed for the Nami Blast equipped with its 60V 29Ah lithium-ion battery and uses the original Nami 2-pin connector.

➡️ Is the 10A charger adjustable?

Yes. The charging current is adjustable from 3A to 10A using a rotary dial. This allows you to adapt the power according to the time you have available.

➡️ How long does it take to charge the Nami Blast?

Allow approximately 9h30 to 10h at 3A, approximately 5h45 to 6h at 5A, and approximately 3h to 3h15 at 10A for the 60V 29Ah battery.

➡️ Should I always charge at 10A?

No. When you are not in a hurry, you can select a lower intensity such as 3A or 5A. The 10A mode is particularly useful when you want to minimize charging time.

➡️ What is the OLED screen for?

The OLED screen displays in real-time the battery voltage, the selected current, and the charged capacity.

➡️ Is an adapter needed?

No. The charger comes directly with the original Nami 2-pin connector corresponding to the Nami Blast's charging port.

➡️ Does the charger heat up at 10A?

Some heat generation is normal at high power. The charger has active ventilation and an aluminum heat sink casing to efficiently dissipate this heat.

---

📦 Warranty & Shipping

• 🚚 Fast shipping within 24/48h in France and Europe
• 🛡️ 2-year warranty
• 🔧 Each charger is individually tested before shipment

---

📩 Support

Need technical advice or compatibility verification? 👉 Contact us at contact@source-it.fr.

*Non-contractual photos – Source'IT.