Talaria KOMODO Charger 97.2V - 113.4V 18A (Original Battery)

Talaria Komodo Charger – 97.2V (113.4V – 18A) – Original Connector – IP67

This 113.4V – 18A Source'IT charger is specifically designed to replace the original charger for the Talaria Komodo equipped with its 97.2V 45Ah battery. It directly uses the original Talaria Komodo connector to allow for simple connection, without modification to the bike or additional adapters.

It primarily serves as a replacement solution for the manufacturer's charger, with characteristics perfectly suited to the original battery. Its charging current of 18A is slightly higher than the 15A of the original charger, also allowing for a slightly faster recharge.

Its output voltage is precisely regulated at 113.4V, corresponding to the charging voltage of the original 97.2V 45Ah battery of the Talaria Komodo.

The charger also benefits from a robust design with IP67 protection. Heat dissipation is ensured by a heat sink combined with active ventilation, allowing a stable operating temperature to be maintained throughout the charging process.

Its universal power supply 110V – 240V AC allows it to be used in Europe as well as the United States. On an American installation at 110V / 120V, the maximum available current may however be less than 18A: contact us for more information.

🔧 Technical Specifications

• Output Voltage: 113.4V DC
• Compatible Battery: Original Talaria Komodo 97.2V 45Ah battery
• Charging Current: 18A
• Connector: Original Talaria Komodo connector
• Input / Power Supply: 110V – 240V AC, 50/60Hz
• Estimated Charging Time: approximately 2h30 to 3h00
• Protection: IP67
• Heat Dissipation: heat sink + active ventilation
• Electronic Protections: overvoltage, overcurrent, overload, short circuit, reverse polarity and overheating

🏍️ A Direct Replacement for the Original Talaria Komodo Charger

This model was selected to offer a reliable replacement solution for the original Talaria Komodo charger. It is designed for the manufacturer's 97.2V 45Ah battery and directly uses the original charging port of the bike.

No wiring harness or battery modification is necessary: simply connect the charger to the Talaria Komodo as with the original model.

Its output voltage of 113.4V is adapted to the battery to ensure a complete and properly regulated recharge.

⚡ 18A instead of 15A: Slightly Faster than Original

In addition to replacing the original charger, this model offers a small gain in charging speed. The manufacturer's charger operates at 15A, compared to 18A for our Source'IT model.

The available current is therefore approximately 20% higher. The objective remains nevertheless to offer a replacement charger suitable for the Talaria Komodo, with the added advantage of a slightly reduced charging time compared to the original model.

The actual charging time depends on the battery level when connected, its temperature, and the final charging phase controlled by the BMS.

💧 IP67 Design and Efficient Cooling

The charger benefits from an IP67 protection rating, offering enhanced protection for its electronics against dust and moisture.

Thermal management is ensured by a heat sink radiator allowing the heat generated by the electronics to be dissipated. Active ventilation complements the system to maintain a stable temperature during long charging sessions.

✅ Why Choose This Source'IT Charger for Talaria Komodo?

• ✔️ Direct replacement for the original charger
• ✔️ Compatible with the original 97.2V 45Ah battery
• ✔️ Original Talaria Komodo connector
• ✔️ No adapter or modification required
• ✔️ Charging current of 18A
• ✔️ Slightly faster than the original 15A charger
• ✔️ Voltage precisely regulated at 113.4V
• ✔️ Universal power supply 110V – 240V
• ✔️ IP67 protection
• ✔️ Heat dissipation by heat sink
• ✔️ Active ventilation
• ✔️ Complete electronic protections
• ✔️ Product individually tested before shipping
• ✔️ 2-year warranty

🔒 Safety and Reliability

The charger is designed to deliver a stable voltage of 113.4V adapted to the original Talaria Komodo battery. Its electronics ensure constant charge regulation and integrate various protections against overvoltage, overcurrent, short circuits, and overheating.

The system combining heat sink and active ventilation ensures good thermal management of the charger during operation.

After intensive use of the bike, it is recommended to let the battery cool down before starting to recharge it.

❓ FAQ – Talaria Komodo Charger 97.2V / 113.4V – 18A

➡️ Can this charger replace the original one for my Talaria Komodo?

Yes. This is precisely the objective of this model. It is designed for the original Talaria Komodo 97.2V 45Ah battery and has the original connector of the bike, allowing it to directly replace the manufacturer's charger.

➡️ Do I need an adapter to connect it?

No. The charger is directly equipped with the original Talaria Komodo connector. No adapter or wiring harness modification is necessary.

➡️ Is it faster than the original charger?

Yes, slightly. The original charger operates at 15A while this model delivers up to 18A. It therefore slightly reduces the recharging time while remaining primarily a replacement solution for the original charger.

➡️ How long does it take to recharge the 97.2V 45Ah battery?

Allow approximately 2h30 to 3h00 depending on the battery's discharge level, its temperature, and the final charging phase managed by the BMS.

➡️ Is the charger waterproof?

The charger benefits from an IP67 protection rating. Its electronics are protected against dust and moisture, while heat dissipation is ensured by a heat sink combined with active ventilation.

➡️ Can I use this charger in the United States?

Yes. The charger accepts a power supply between 110V and 240V AC and can therefore be used in the United States.

On an American power supply at 110V / 120V, the maximum charging current may however be less than 18A depending on the configuration and available power. For use in the United States, contact us before ordering so we can confirm the available performance.

➡️ Does the charger heat up during recharging?

A certain amount of heat production is normal. The charger uses a heat sink radiator complemented by active ventilation to effectively dissipate this heat.

📦 Delivery & Warranty

• 🚚 Fast shipping in France, Europe, and internationally
• 🛡️ 2-year warranty
• 🔧 Each charger is individually tested before shipping
• 🇺🇸 For use in the United States: contact us to know the maximum available current at 110V / 120V

📩 Support

Need compatibility verification or information for use in the United States? 👉 contact@source-it.fr

*Non-contractual photos – Source'IT.