5A fan-cooled charger for VSETT 11+ – 60V (67.2V) or 72V (84V) – 3-pin XLR connector

This Source'IT 5A fast charger is designed for all versions of the VSETT 11+ , whether equipped with a 60V or 72V battery. Simply choose the variant corresponding to your scooter's voltage: 67.2V for 60V models and 84V for 72V models. Each charger is ventilated, regulated, and safe , with a 100% compatible 3-pin XLR connector.

Two variants available

➡️ 60V variant – 67.2V output : suitable for VSETT 11+ 60V models equipped with 31.2Ah or 42Ah batteries.
➡️ 72V variant – 84V output : compatible with VSETT 11+ 72V (31Ah, 32Ah or 35Ah).

Tip: If the charging voltage indicated on the battery is 67.2 V , choose the 60 V version; if it is 84 V , choose the 72 V version.

🔧 Technical specifications

• Output voltage: 67.2 V or 84 V depending on the variant
• Charging current: 5A (Fast Charging)
• Connector: 3-pin XLR
• Battery type: 60V (16S) or 72V (20S) lithium-ion
• Cooling: active ventilation – aluminum case with heat sink
• Protections: overvoltage, overheating, reverse polarity, short circuit
• LED: red = charging / green = full battery
• Certification: CE – individually tested before shipment

⏱️ Estimated charging time

• On the 60V 31.2Ah versions, a full recharge takes approximately 6 hours and 30 minutes.
• For the 60V 42Ah versions, allow approximately 8 and a half hours.
• For 72V 31 or 32Ah batteries, the average time is 6 to 6.5 hours.
• On the 72V 35Ah version, a full charge takes approximately 7 hours.

These values ​​are indicative and may vary depending on the temperature and battery condition. The VSETT 11+ has two XLR ports: you can use two 5A chargers in parallel to halve these charging times.

💨 Advantages of the Source'IT 5A charger

• ✅ Regulated voltage (67.2 V or 84 V) depending on the battery model
• ✅ Active cooling – integrated silent fan
• ✅ Durable aluminum casing and high heat dissipation
• ✅ Fast and stable charging that preserves Li-ion cells
• ✅ Grade A components, individually tested, 2-year warranty

❓ FAQ – VSETT 11+ 5A Charger

➡️ Can I use the 84V charger on a 60V battery?

No ❌! Always use the charger that matches your battery's voltage. An 84V charger would damage a 60V battery.

➡️ Does the 5A charger get hot?

No. The ventilated aluminum casing maintains a stable temperature throughout the entire charge, even during prolonged use.

➡️ Is it compatible with all VSETT 11+ models?

Yes ✅! All VSETT 11+ versions (60V or 72V) using a 3-pin XLR connector are compatible. Simply select the correct voltage variant.

📦 Delivery & Warranty

• 🚚 Fast shipping: 24/48 hours – France & Europe
• 🛡️ Warranty: 2 years – new product, CE compliant

📩 Assistance

Need help choosing the right variant (60V or 72V)? 👉 Email us at contact@source-it.fr and attach a photo of your battery label for confirmation before shipping.

*Source'IT – French specialist in ventilated chargers for VSETT 11+.