SOURCE’IT · CHARGING SPECIALIST
Chargers Horwin CR6 motorcycle
Find the charger that suits your needs and charging routine.
Horwin CR6 Chargers – 72V (84V) – 5A / 10A adjustable / 15A adjustable – 55Ah Battery Discover our range of Source'IT chargers for the Horwin CR6 electric motorcycle, specially designed for the 72V 55Ah battery. Three versions are a...
Learn more-
Horwin CR6 Electric Motorcycle External Charger 72V-84V 10A
Vendor:Source'itRegular price €379,50 EURRegular priceUnit price perSale price €379,50 EUR -
External Charger for Horwin CR6 Electric Motorcycle 72V-84V 15A
Vendor:Source'itRegular price €559,00 EURRegular priceUnit price perSale price €559,00 EUR
NEED A HAND?
Let us help you choose your charger.
Send us your device model and a photo of the connector. We will help you check voltage and compatibility before you buy.
Horwin CR6 Chargers – 72V (84V) – 5A / 10A adjustable / 15A adjustable – 55Ah Battery
Discover our range of Source'IT chargers for the Horwin CR6 electric motorcycle, specially designed for the 72V 55Ah battery. Three versions are available to meet different needs: 5A, 10A adjustable, and 15A adjustable.
The 15A version provides a charging power equivalent to that of the original Horwin CR6 charger, while the 5A and 10A versions offer suitable solutions when charging time is less critical.
Unlike the original system with a charger installed inside the motorcycle, our models are external chargers. Each charger comes with a specific extension cable to directly connect the battery to the Horwin CR6's original charging port.
The extension cable passes through the space previously occupied by the original charger. Once installed, you can connect your Source'IT charger from outside the motorcycle, without having to access the battery directly for each charge.
The chargers deliver a precisely regulated voltage of 84V, corresponding to the full charge voltage of the Horwin CR6's 72V lithium-ion battery.
🏍️ Horwin CR6 Compatibility
- Motorcycle: Horwin CR6
- Battery: 72V 55Ah lithium-ion
- Charging voltage: 84V
- Installation: external charger with extension cable supplied
- Connection: uses the original Horwin CR6 charging port
⚡ The three available chargers
🔋 Horwin CR6 Charger – 84V 5A
The 5A charger is a simple and reliable solution for charging the 72V 55Ah battery. Its lower current allows for progressive charging when you have enough time between uses.
Approximate charging time: approximately 11 hours.
⚡ Horwin CR6 Charger – 84V up to 10A adjustable
The 10A adjustable model allows you to adapt the charging current to your needs. You can use a reduced intensity when you're not in a hurry and increase the power up to 10A when you want to reduce the charging time.
Charging time at 10A: approximately 5h30
🚀 Horwin CR6 Charger – 84V up to 15A adjustable
The 15A adjustable model is the most powerful version in the range. At full power, it provides a charging power identical to the original Horwin CR6 charger.
Its adjustable current also allows you to decrease the intensity when you have more time to charge.
Charging time at 15A: approximately 4 hours.
🔌 External charger and extension cable included
The Horwin CR6 originally uses a charger installed directly inside the motorcycle. Our Source'IT chargers work differently: the charger becomes external and can therefore be easily replaced, transported, or used independently of the motorcycle.
To enable this installation, each charger comes with a specific extension cable. This connects between the 72V 55Ah battery and the original Horwin CR6 charging port.
The cable is routed through the location where the original charger was previously located. The motorcycle's external charging port is thus still used for your recharges.
🔧 Technical Specifications
- Battery voltage: 72V lithium-ion
- Output voltage: 84V DC
- Battery capacity: 55Ah
- Available versions: 5A / up to 10A adjustable / up to 15A adjustable
- Maximum power: 15A, equivalent to the original charger
- Installation: external charger
- Extension cable: supplied with each charger
- Connection: battery → extension cable → original Horwin CR6 charging port
- Cooling: active ventilation
- Protections: overvoltage, overcurrent, overcharge, short circuit, reverse polarity, and overheating
⏱️ Horwin CR6 72V 55Ah Charging Time
- 5A Charger: ≈ 11h
- Adjustable Charger up to 10A: ≈ 5h30 to 6h at full power
- Adjustable Charger up to 15A: ≈ 4h at full power
Charging times are indicative and may vary depending on the discharge level, battery temperature, and the final balancing phase managed by the BMS.
✅ Why choose a Source'IT charger for Horwin CR6?
- ✔️ Specially adapted for the Horwin CR6 72V 55Ah
- ✔️ Three power outputs available: 5A, 10A, and 15A
- ✔️ 10A and 15A adjustable versions
- ✔️ 15A version offering identical power to the original charger
- ✔️ System transformation to an external charger
- ✔️ Specific extension cable included with the charger
- ✔️ Retention of the motorcycle's original charging port
- ✔️ Precisely regulated voltage at 84V
- ✔️ Active ventilation
- ✔️ Comprehensive electronic protections
- ✔️ Product individually tested before shipping
- ✔️ 2-year warranty
❓ FAQ – Horwin CR6 72V 55Ah Chargers
➡️ Are these chargers compatible with the Horwin CR6?
Yes. This range is designed for the Horwin CR6 equipped with its 72V 55Ah battery. The chargers deliver an output voltage of 84V.
➡️ Does the charger replace the original internal charger?
Yes. The principle is to replace the internal charging system with an external charger. A specific extension cable is provided to connect the battery to the motorcycle's original charging port.
➡️ How do I install the extension cable?
The extension cable connects between the battery and the original charging port. It passes through the location previously occupied by the original internal charger. Once installed, the Source'IT charger plugs in from outside the motorcycle.
➡️ Which version corresponds to the power of the original charger?
The 84V 15A adjustable version. Used at full power, it delivers 15A, which is a charging power identical to that of the original Horwin CR6 charger.
➡️ Why choose an adjustable charger?
The 10A and 15A adjustable versions allow you to adapt the power to your needs. You can reduce the intensity when you have more time or use maximum power when you want to charge faster.
➡️ What is the charging time with the 15A model?
At full power, allow approximately 4 hours for the 72V 55Ah battery, depending on its discharge level and the final charging phase.
➡️ Is the extension cable included?
Yes. The extension cable needed for the conversion to an external charger is included with the charger.
➡️ Is the original external charging port retained?
Yes. The system is precisely designed to allow you to continue using the Horwin CR6's original charging port, despite switching from an internal to an external charger.
📦 Delivery & Warranty
- 🚚 Fast shipping in France and Europe
- 🛡️ 2-year warranty
- 🔧 Specific Horwin CR6 extension cable included
- 🔧 Each charger is individually tested before shipping
📩 Support
Need information regarding installation or compatibility with your Horwin CR6? 👉 contact@source-it.fr
*Non-contractual photos – Source'IT.
Dualtron
Teverun
Nami
Xiaomi
Ninebot & Segway
Navee
Awesome
Kukirin
Joyor
Urban Glide
BOYUEDA
Outfit of the day
Kamikaze
Futecher & Bluetran
Rovoron
Hello
Vsett
E-twow
Aovo
Inokim
Neither
Speedway
SXT
IsinWheel
Wispeed
Microphone
Speedtrott
Zero
Zosh
GLOBAL 3T
TROTRX
Moovway
Pure Air
Hero
Review
Mobygum
Wegoboard
Inoë
Laotia
FLJ
Nanorobot
Renault
Kuickwheel
Yadea
Twair
Pager
Inmotion
Sur-Ron
Talaria
E-Ride Pro
Arctic Leopard
Super Soco
Dayi E-ODIN
Wayscral
Pink Mobility
Scooter Rider
Horwin
Golden Lion
QJ MOTORS
DOOHAN
CRZ
EUROCKA
TROMOX
2Twenty
Initiative
Moped
Stromer electric bike
Fiido
DUOTTS
ENGWE
Chargers for license-free cars
Lead/AGM Charger
Adjustable Chargers
iPhone Chargers
IN MOTION

