Arctic Leopard XE PRO S Chargers

Arctic Leopard XE PRO S Chargers – 74V 60Ah – 10A, 15A fast and 20A ultra-fast

Discover our range of chargers for the Arctic Leopard XE PRO S, specifically designed for its 74V 60Ah lithium-ion battery. Three power levels are available to meet all needs: 10A for standard charging, 15A fast charger adjustable from 3A to 15A, and 20A ultra-fast charger adjustable from 3A to 20A.

The 15A and 20A versions feature an OLED screen and a control dial to easily adjust the charging current. You can therefore opt for a gentler charge when you are not in a hurry and increase the power when you want to get your motorcycle back on the road quickly.

All our chargers are equipped directly with the original Arctic Leopard XE PRO S connector to allow a direct connection to the motorcycle, without the need for adapters or modifications to the original wiring harness.

---

🏍️ Compatible Arctic Leopard Motorcycle

• Arctic Leopard XE PRO S – 74V 60Ah lithium-ion battery

---

⚡ 84V charging and battery display

For Arctic Leopard models equipped with a 74V battery, Source’it chargers limit the charge to 84V, or 4.2V per cell: the standard full-charge voltage for a 20S lithium-ion battery using 4.2V cells. The original charger reaches 86V, or 4.3V per cell. Our choice of a lower voltage aims to preserve the battery's longevity. The motorcycle may then display approximately 90%, without this necessarily corresponding to 10% less range: the relationship between voltage and stored energy is not linear, and the display depends on the gauge's calibration. Charging at 84V therefore represents a compromise between range and battery preservation. If you wish to charge at 86V, a charger can be adapted upon request, subject to compatibility with your battery.

---

🔧 Technical Specifications

• Compatible model: Arctic Leopard XE PRO S
• Battery: 74V 60Ah lithium-ion
• Standard charger: 10A
• Fast charger: adjustable from 3A to 15A
• Ultra-fast charger: adjustable from 3A to 20A
• Screen: OLED on 15A and 20A versions
• Adjustment: current selection dial on adjustable versions
• Connectivity: original Arctic Leopard XE PRO S connector
• Cooling: active ventilation
• Casing: high thermal dissipation aluminum
• Protections: overvoltage, overcurrent, overload, short-circuit, polarity reversal, and overheating

---

🔋 Arctic Leopard XE PRO S 10A Charger

The 10A model is our standard charger for the Arctic Leopard XE PRO S. With the 60Ah battery, it provides an excellent compromise between charging time and charging current.

At 10A, the current represents approximately 0.17C for a 60Ah battery.

Estimated charging time at 10A: approximately 6h to 6h30.

---

⚡ Arctic Leopard XE PRO S 15A Fast Charger – Adjustable from 3A to 15A

The 15A model is our fast charging solution for the Arctic Leopard XE PRO S. Its current is adjustable from 3A to 15A, making it easy to adapt the power based on the time you have available.

When charging overnight, you can select a lower intensity. When you need to leave quickly, you can gradually increase the power up to 15A.

At maximum power, 15A represents approximately 0.25C for a 60Ah battery.

Estimated charging time at 15A: approximately 4h to 4h30.

---

⚡ Arctic Leopard XE PRO S 20A Ultra-Fast Charger – Adjustable from 3A to 20A

The 20A model is our ultra-fast charging solution for the Arctic Leopard XE PRO S. It significantly reduces motorcycle downtime thanks to a maximum current of 20A.

Its current is fully adjustable from 3A to 20A. You can therefore use a reduced current when you are not in a hurry, then select 10A, 15A, or up to 20A when you need a much faster charge.

At maximum power, 20A represents approximately 0.33C for a 60Ah battery.

Estimated charging time at 20A: approximately 3h to 3h30.

---

⏱️ Charging time comparison

• 10A: approximately 6h to 6h30
• 15A fast: approximately 4h to 4h30
• 20A ultra-fast: approximately 3h to 3h30

These times are indicative for a heavily discharged 60Ah battery. Actual time may vary based on the initial charge level, battery temperature, and the final charging and balancing phase managed by the BMS.

---

🖥️ OLED screen and adjustable current

The 15A fast and 20A ultra-fast versions feature an OLED screen to view the charger's main operating information.

A rotary dial allows you to easily adapt the charging current:

• 15A version: adjustable from 3A to 15A
• 20A version: adjustable from 3A to 20A

This adjustability allows you to use a lower current when charging time is not a priority and keep maximum power for situations where you need to leave quickly.

---

🔌 Original Arctic Leopard XE PRO S connector

All three versions are equipped directly with the original Arctic Leopard XE PRO S connector.

No adapter, connector replacement, or modification to the motorcycle's electrical wiring is required. The charger is delivered ready to plug in.

---

🌡️ Active ventilation and enhanced thermal dissipation

Our Arctic Leopard XE PRO S chargers feature active ventilation to effectively dissipate the heat generated during charging.

Their aluminum heat sink casing also helps maintain a controlled operating temperature, which is especially important during high-power charging at 15A or 20A.

---

🔒 Integrated electronic protections

• Overvoltage protection
• Overcurrent protection
• Overload protection
• Short-circuit protection
• Polarity reversal protection
• Overheating protection

---

⚠️ Charging recommendations

After intensive use of your Arctic Leopard XE PRO S, it is recommended to let the battery return to a normal temperature before starting a charge, especially when you want to use the maximum power of 15A or 20A.

When time is not a priority, the adjustable versions allow you to select a lower current. The maximum power levels are particularly beneficial when you want to significantly reduce downtime between uses.

The charger should always be placed in a well-ventilated environment and must never be covered during operation.

---

✅ Why choose our Arctic Leopard XE PRO S chargers?

✔️ Specifically designed for the Arctic Leopard XE PRO S.
✔️ Compatible with the 74V 60Ah battery.
✔️ 10A standard, 15A fast, and 20A ultra-fast.
✔️ 15A version adjustable from 3A to 15A.
✔️ 20A version adjustable from 3A to 20A.
✔️ OLED screen on adjustable versions.
✔️ Original Arctic Leopard XE PRO S connector.
✔️ Active ventilation.
✔️ High thermal dissipation aluminum casing.
✔️ Complete electronic protections.
✔️ Each charger is individually tested before shipment.
✔️ 2-year warranty.
✔️ Fast shipping from France to France and Europe.

---

❓ FAQ – Arctic Leopard XE PRO S Chargers

---

📦 Warranty & Shipping

• 🚚 Fast shipping from France
• 🇪🇺 Delivery in France and throughout Europe
• 🛡️ 2-year warranty
• 🔧 Each charger is individually tested before shipment
• 🔌 Original Arctic Leopard XE PRO S connector

---

📩 Need advice or a compatibility check? Contact us directly.

*Photos are for illustrative purposes only – Source'IT.