Arctic Leopard EX-800 PRO Chargers

Arctic Leopard EX 800 PRO Chargers – 72V / 74V 75Ah Battery

Discover our range of chargers for the Arctic Leopard EX 800 PRO, specially designed for its 72V / 74V 75Ah lithium-ion battery.

We offer several charging power options to suit all needs: 5A for standard charging, 10A adjustable from 3A to 10A, 15A adjustable from 3A to 15A, and 20A adjustable from 3A to 20A for ultra-fast charging.

The adjustable models feature an OLED screen to view key charging information and a control dial to easily adapt the charging current to your requirements.

All our chargers come directly equipped with the original Arctic Leopard EX 800 PRO connector, allowing them to be plugged into the motorcycle without the need for adapters or modifications to the original wiring.

---

🔧 Technical Specifications

• Compatible model: Arctic Leopard EX 800 PRO
• Battery: 72V / 74V 75Ah lithium-ion
• Charging voltage: adapted for the Arctic Leopard EX 800 PRO 72V / 74V battery
• Pocket Charger: 5A
• Fast Charger: adjustable from 3A to 10A
• Very Fast Charger: adjustable from 3A to 15A
• Ultra-Fast Charger: adjustable from 3A to 20A
• Screen: OLED on adjustable versions
• Adjustment: current selection dial
• Connectors: original Arctic Leopard EX 800 PRO connector
• Cooling: active ventilation
• Housing: high thermal dissipation on high-power versions
• Integrated protections: overvoltage, overcurrent, overload, short-circuit, reverse polarity, and overheating

---

⚡ Multiple charging powers available

With a significant capacity of 75Ah, the Arctic Leopard EX 800 PRO battery may require many hours to charge with a low-power charger. Our various versions allow you to choose between standard charging and much faster charging.

Arctic Leopard EX 800 PRO 5A Charger

The 5A model is intended for users who primarily need standard charging. It is particularly suitable for overnight charging when charge time is not a priority.

Estimated charge time: approximately 15h to 16h.

---

Arctic Leopard EX 800 PRO 10A Charger – Adjustable from 3A to 10A

The 10A model allows you to select a current between 3A and 10A. It is an excellent compromise for daily use, reducing charging time by about half compared to the 5A model.

Its OLED screen lets you view operating information, while the dial allows you to easily adjust the charging current.

Estimated charge time at 10A: approximately 7h30 to 8h.

---

Arctic Leopard EX 800 PRO 15A Charger – Adjustable from 3A to 15A

The 15A model offers an adjustment range between 3A and 15A. It allows you to maintain the option of low-current charging while having significantly higher power available when you need to get back on your bike quickly.

At its maximum power, 15A represents approximately 0.20C for a 75Ah battery.

Estimated charge time at 15A: approximately 5h to 5h30.

---

Arctic Leopard EX 800 PRO 20A Charger – Adjustable from 3A to 20A

The 20A model is our ultra-fast charging solution for the Arctic Leopard EX 800 PRO. Its current can be adjusted from 3A up to 20A directly from the charger.

At 20A, the charging current represents approximately 0.27C for a 75Ah battery and significantly reduces the bike's downtime.

Estimated charge time at 20A: approximately 3h30-4h00

---

⏱️ Charging time comparison

• 3A: approx. 25h to 26h
• 5A: approx. 15h to 16h
• 10A: approx. 7h30 to 8h
• 15A: approx. 5h to 5h30
• 20A: approx. 3h45 to 4h15

These values are provided as an indication for a heavily discharged 75Ah battery. The actual time depends on the initial charge level, battery temperature, and the final charging and balancing phase managed by the BMS.

---

⚡ 84V charging and battery display

For Arctic Leopard models equipped with a 74V battery, Source’it chargers limit the charge to 84V, i.e., 4.2V per cell: the standard full-charge voltage for a 20S lithium-ion battery using 4.2V cells. The original charger reaches 86V, i.e., 4.3V per cell. Our choice of a lower voltage aims to preserve battery longevity. The bike may then display approximately 90%, without this necessarily corresponding to 10% less range: the relationship between voltage and stored energy is not linear, and the display depends on the gauge calibration. Charging at 84V therefore represents a compromise between range and battery preservation. If you prefer charging at 86V, a charger can be adapted upon request, subject to compatibility with your battery.

Charger compatibility must be verified with the actual battery configuration, cell chemistry, and BMS parameters.

---

🖥️ OLED screen and adjustable charging current

The 10A, 15A, and 20A versions feature an OLED screen and an adjustment system to select the desired current.

You can use a reduced current when you have enough time, and increase the power only when you need a faster recharge.

• 10A version: adjustable from 3A to 10A
• 15A version: adjustable from 3A to 15A
• 20A version: adjustable from 3A to 20A

---

🔌 Original Arctic Leopard EX 800 PRO connector

All our chargers are directly equipped with the original Arctic Leopard EX 800 PRO connector.

No adapters, connector replacements, or modifications to the bike's electrical harness are necessary. The charger is delivered ready to plug in.

---

🌡️ Active ventilation and enhanced thermal dissipation

Our chargers feature active ventilation to effectively dissipate the heat generated during charging.

The high-power versions also benefit from a housing that promotes thermal dissipation, which is particularly important during prolonged use at 10A, 15A, or 20A.

---

🔒 Integrated electronic protections

The chargers incorporate several protection systems to ensure reliable charging:

• Overvoltage protection
• Overcurrent protection
• Overload protection
• Short-circuit protection
• Reverse polarity protection
• Overheating protection

---

⚠️ Charging recommendations

After intensive use of your Arctic Leopard EX 800 PRO, it is recommended to let the battery return to a normal temperature before starting a charge, especially when using the 15A or 20A modes.

For charges where time is not a priority, you can select a lower current on adjustable versions. The most powerful charging modes are particularly useful when you want to reduce downtime between two uses.

The charger must always be placed in a properly ventilated environment and must never be covered while in operation.

---

✅ Why choose our Arctic Leopard EX 800 PRO chargers?

• ✔️ Specially designed for the Arctic Leopard EX 800 PRO
• ✔️ Compatible with the 72V / 74V 75Ah battery
• ✔️ 5A, 10A, 15A, and 20A available
• ✔️ 10A version adjustable from 3A to 10A
• ✔️ 15A version adjustable from 3A to 15A
• ✔️ 20A version adjustable from 3A to 20A
• ✔️ OLED screen on adjustable models
• ✔️ Original Arctic Leopard EX 800 PRO connector
• ✔️ Active ventilation
• ✔️ Enhanced thermal dissipation
• ✔️ Complete electronic protections
• ✔️ Each charger is individually tested before shipment
• ✔️ 2-year warranty
• ✔️ Fast shipping from France to France and Europe

---

❓ FAQ – Arctic Leopard EX 800 PRO Chargers

➡️ Which chargers are available for the Arctic Leopard EX 800 PRO?

We offer four versions: 5A, 10A adjustable from 3A to 10A, 15A adjustable from 3A to 15A, and 20A adjustable from 3A to 20A.

➡️ How long does it take to charge the 75Ah battery?

Expect approximately 15h to 16h at 5A, 7h30 to 8h at 10A, 5h to 5h30 at 15A, and 3h45 to 4h15 at 20A. These durations may vary depending on the discharge level and the final charging phase.

➡️ Can I reduce the fast charger current?

Yes. The fast models are adjustable. Depending on the version chosen, you can adjust the current from 3A to 10A, from 3A to 15A, or from 3A to 20A.

➡️ What is the OLED screen for?

The OLED screen allows you to view key operating information for the charger. A dial also allows for easy adjustment of the charging current on adjustable versions.

➡️ Why might the bike display around 90% after an 84V charge?

The percentage depends on the gauge calibration. The relationship between voltage and stored energy is not linear: a 90% display does not necessarily mean 10% less range.

➡️ Does the charger have the original connector?

Yes. The different versions are equipped with the original Arctic Leopard EX 800 PRO connector to allow direct connection to the bike.

---

📦 Warranty & Shipping

• 🚚 Fast shipping from France
• 🇪🇺 Delivery to France and throughout Europe
• 🛡️ 2-year warranty
• 🔧 Each charger is individually tested before shipment
• 🔌 Original Arctic Leopard EX 800 PRO connector

---

📩 Support

Need technical advice or compatibility verification for your Arctic Leopard EX 800 PRO? Contact us at contact@source-it.fr.

*Photos are for illustrative purposes only – Source'IT.