🔌 Dualtron Thunder 3 – 72V (84V) Fast Chargers

Discover our complete range of chargers for the Dualtron Thunder 3 scooter. Designed for 72V (20S Li-ion) batteries, our chargers are available in standard 2A, fast 5A, and ultra-fast 10A. They are ventilated for active cooling, equipped with advanced safety protections, and guarantee perfectly adapted and secure charging for your Dualtron Thunder 3.

⚡ Main Features

• ✅ Charging Voltage: 84V (for 72V Dualtron Thunder 3 battery)
• ✅ Current Options: 2A (standard), 5A (fast), or 10A (ultra-fast)
• ✅ Connector: LP16 3-pin Dualtron
• ✅ Ventilation: all our chargers are ventilated to limit heat build-up
• ✅ Protections: automatic shut-off, overvoltage, overheating, short-circuit

🔋 Estimated Charging Time – Dualtron Thunder 3 (72V 40Ah battery)

• 2A Charger (standard): approximately 20 to 22 hours for a full charge
• 5A Charger (fast): approximately 8 hours
• 10A Charger (ultra-fast): approximately 4 hours

Indicative charging times for a completely empty 40Ah battery. Actual duration may vary depending on temperature, battery condition, and the final BMS balancing phase.

🔋 Why choose our Dualtron Thunder 3 chargers?

Our chargers are designed to suit all uses:

• 2A Standard: slow and gentle charge to preserve the battery.
• 5A Fast: charging time divided by approximately 2 to 3 compared to the 2A charger.
• 10A Ultra Fast: ideal for significantly reducing recharge time for large batteries like that of the Thunder 3.

📦 Service & warranties

• 🚚 Fast shipping in France & Europe
• 🛡️ 2-year warranty
• 🔧 Technical assistance and connector adaptation upon request

❓ FAQ – Dualtron Thunder 3 Chargers

👉 What charging voltage for a Dualtron Thunder 3?

The Dualtron Thunder 3 uses a 72V (20S lithium-ion) battery. The appropriate charger must deliver a voltage of 84V at the end of charging.

👉 Are the chargers ventilated?

Yes. All our chargers feature active ventilation cooling, which helps limit temperature rise during charging.

👉 Is a fast charger (5A or 10A) dangerous?

No. The cells, cables, and BMS of the Dualtron Thunder 3 are designed to withstand these currents. The chargers also have electronic protections (overheating, overvoltage, short-circuit).

👉 What connector is used?

The Dualtron Thunder 3 generally uses an LP16 3-pin connector. If in doubt, you can send us a photo of your charging port.

📩 Need technical advice or compatibility check? Contact us directly.

*Non-contractual photos.