Xiaomi SCOOTER 4 GO electric scooter charger

Xiaomi Scooter 4 Go Charger – 25.2V (24V) 2A – With active ventilation.

This 25.2V – 2A ventilated charger for Xiaomi Scooter 4 Go electric scooter ( 21.6V Li-ion battery – 6S ) allows a charge 2× faster than the original charger , without presenting the slightest danger to the battery. Its active ventilation cooling maintains a stable temperature throughout the charge, guaranteeing safety, reliability and performance. Ideal for replacing the original charger or having a second adapter at home or at work.

---

🔧 Technical specifications

• Output voltage: 25.2V DC (end of charge of a 6S pack at 4.2V / cell)
• Charging current: 2A (≈ 2× faster than the original 1A charger)
• Connections: 5.5mm jack (Xiaomi 4GB standard)
• Cooling: active ventilation – heat-dissipating housing
• Indicator: Red LED = charging / Green = end of charging
• Protections: overvoltage, overload, overheating, short circuit, polarity reversal
• Compatibility: Xiaomi Electric Scooter 4 Go (21.6V – 6S)

---

⚡ 2× faster, without any risk

The Source'IT 25.2V – 2A charger delivers a charging current doubled compared to the original model (1A), which reduces the charging time by half while respecting the limits of the BMS and the 6S Li-ion chemistry. Thanks to its active ventilation , the internal temperature remains perfectly controlled: no risk of overheating, neither for the charger nor for the battery.

This design saves time in daily use without affecting the life of the pack. The output voltage is strictly regulated at 25.2V , in accordance with the specification of 21.6V Li-ion batteries.

---

📌 25.2V: the exact voltage for 24V Li-ion battery

The Xiaomi Scooter 4 Go is equipped with a 21.6V Li-ion battery (6 cells in series) . Its full charge voltage is 25.2V (6 × 4.2V per cell). A higher charger (e.g. 29.4V for 7S) would damage the battery, while a lower charger would not allow a full charge. The Source'IT model is perfectly suited for stable balancing and maximum longevity .

Tip: Recharge after use, before leaving. For extended storage, keep the battery between 40% and 60% to maintain cell health.

---

❓ FAQ – Xiaomi Scooter 4 Go (25.2V – 2A)

➡️ How is it faster?

The original Xiaomi charger typically delivers 1A . The Source'IT charger, with 2A , halves charging time while remaining fully compatible and safe thanks to its electronic regulation and active ventilation.

➡️ Is 2A safe?

Yes. The 21.6V (6S Li-ion) battery can easily support 2A of continuous charging. The charger is CE certified , has comprehensive protections and remains at a controlled temperature thanks to its active ventilation .

➡️ Is the charger ventilated?

Yes. All Source'IT chargers are equipped with an active ventilation system that limits heating, improves current stability, and increases component lifespan.

➡️ Typical charging time?

Varies depending on battery capacity. At 2A , count approximately: capacity (Ah) ÷ 2 hours. Example: an 8 Ah battery ≈ 4 hours of charging, compared to 8 hours with the original charger.

➡️ Compatibility

This model is intended for the Xiaomi Scooter 4 Go equipped with a 5.5 × 2.1 mm jack connector. It is not compatible with 36V (42V) or 48V (54.6V) models.

---

📦 Delivery & Warranty

• Shipping 24/48 hours (France & Europe)
• 2-year warranty – each charger is individually tested before shipping
• Compatibility support: contact@source-it.fr

*Non-contractual photos – Source'IT.