Teverun Fighter 10 and Fighter 10+ 60V-67.2V 10A LP16 Ultra-Fast Charger

Adjustable 60V 3A to 10A Ultra-Fast Charger – for Teverun Fighter 10 & Fighter 10+ (OLED screen + rotary knob)

This adjustable 60V – 3A to 10A charger (67.2V output) is specially designed for the Teverun Fighter 10 and Teverun Fighter 10+ electric scooters.

Compatible with 60V (16S lithium-ion) batteries in both 60V 26Ah and 60V 35Ah versions, it allows for ultra-fast and adaptable charging while ensuring perfectly regulated voltage and safe charging.

When charging overnight and not in a hurry, you can charge quietly at 3A or 5A, and when you need to charge quickly, you can go up to 10A.

The ability to adapt the charging current also helps to preserve battery life in the long term.

Its integrated OLED screen displays the charged capacity, battery voltage, and selected charging current in real-time. Adjustment is done simply via a rotary knob.

🔧 Technical Specifications

• Output Voltage: 67.2 V (60 V – 16S lithium-ion battery)
• Charging Current: Adjustable from 3A to 10A
• Adjustment: Rotary knob
• Display: OLED screen (capacity, voltage, current)
• Connector: LP16 – Teverun / Dualtron connector
• Estimated Charging Times:
  • 60V 26Ah Battery
    → 3A: ~8h30
    → 5A: ~5h
    → 10A: ≈ 2h30 to 3h
  • 60V 35Ah Battery
    → 3A: ~12h
    → 5A: ~7h
    → 10A: ≈ 3h30
• Model Compatibility: Teverun Fighter 10, Teverun Fighter 10+
• Compatible Battery Type: 60 V (16S) lithium-ion batteries
• Cooling: Active ventilation – aluminum casing
• Integrated Protections: Overcharge, overheating, reverse polarity, short circuit

⚠️ Mandatory use of the LP16 dual port extension for 10A mode (Supplied with charger)

The Teverun Fighter 10 and Fighter 10+ have two LP16 charging ports.

For 10A use, it is essential to use an LP16 female to 2 LP16 male splitter cable (supplied with the charger) to distribute the charging current across the two original charging ports.

This configuration limits the current to approximately 5A per connector in order to:

• ✔️ Comply with LP16 connector manufacturer specifications
• ✔️ Prevent any overheating of the charging sockets
• ✔️ Preserve the original cable sections
• ✔️ Avoid blowing fuses (inexpensive but annoying to change)
• ✔️ Secure ultra-fast charging at 8A to 10A

⚠️ When the charger exceeds 6.5A, it should never be used on a single charging port.

The extension thus allows a clean and secure distribution of the charging current between the two LP16 ports of the scooter.

🔌 Connection Procedure

1. Connect the 2 male LP16 connectors of the extension cable to the 2 charging ports of the Teverun Fighter 10 or Fighter 10+
2. Then connect the charger to the LP16 extension cable
3. Plug the charger into the wall socket
4. Then adjust the desired charging current via the knob

This method helps to avoid errors in setting the charging current and thus prevent blowing fuses unnecessarily.

✅ Advantages of the adjustable 60V Teverun Fighter 10 charger

✔️ Adjustable from 3A to 10A
✔️ 3A Mode: slow charging ideal for overnight
✔️ 5A Mode: excellent speed/comfort compromise
✔️ 10A Mode: ultra-fast charging
✔️ Integrated OLED screen
✔️ Intuitive adjustment knob
✔️ Active ventilation greatly limiting heating
✔️ Aluminum heat sink casing
✔️ Much more compact and portable charger than some original fast chargers

Each unit is individually tested before shipping and comes with a 2-year warranty.

ℹ️ Additional Information

This adjustable 67.2 V – 3A to 10A charger is perfectly suited for the 60V batteries equipping the Teverun Fighter 10 and Fighter 10+.

For ultra-fast charging at 8A to 10A, it is advisable to let the battery cool down for approximately 30 minutes after use before starting the charge.

The active ventilation system maintains a stable temperature even during long fast charging sessions.

❓ FAQ – Adjustable Charger Teverun Fighter 10 & Fighter 10+

⚡ Is this charger compatible with the Teverun Fighter 10 and Fighter 10+?

Yes ✅, it is designed for the 60V (16S lithium-ion) batteries equipping the Teverun Fighter 10 and Fighter 10+.

🔌 Do I absolutely have to use both charging ports at 10A?

Yes. Beyond 6.5A, it is highly recommended to use the 2 charging ports via the LP16 extension to properly distribute the current.

💥 Does 10A mode damage the battery?

No, when the battery is in good condition and the current is correctly distributed across both charging ports thanks to the dual LP16 extension.

🌡 Does the charger get hot?

Very little thanks to the ventilated aluminum casing and active ventilation.

📦 Is the dual LP16 extension supplied?

Yes, the extension is supplied with the ultra-fast charger for Teverun Fighter 10 and Fighter 10 Plus. It is MANDATORY for any use above 6.5A.

*Non-contractual photos – Source’IT.