Teverun Fighter 11 and Fighter 11+ 60V-67.2V 10A LP16 Ultra-Fast Charger

Adjustable 60V 3A to 10A Ultra-Fast Charger – for Teverun Fighter 11 & Fighter 11+ (OLED screen + rotary knob)

This adjustable 60V – 3A to 10A charger (67.2V output) is specially designed for Teverun Fighter 11 and Teverun Fighter 11+ electric scooters.

Compatible with 60V (16S lithium-ion) batteries for both 60V 25Ah and 60V 35Ah versions, it allows for ultra-fast and adaptable charging while ensuring perfectly regulated voltage and safe charging.

When charging overnight and not in a hurry, you can comfortably charge at 3A or 5A, and when you need to charge quickly, you can go up to 10A.

Being able to adjust the charging intensity also helps to preserve battery life in the long term.

Its integrated OLED screen displays the charged capacity, battery voltage, and selected charging current in real time. Adjustment is easily done via a rotary knob.

🔧 Technical Specifications

• Output voltage: 67.2 V (60 V – 16S lithium-ion battery)
• Charging current: adjustable from 3A to 10A
• Adjustment: rotary knob
• Display: OLED screen (capacity, voltage, current)
• Connector: LP16 – Teverun / Dualtron connector
• Estimated charging times:
  • 60V 25Ah Battery
    → 3A: ~8h30
    → 5A: ~5h
    → 10A: ≈ 2h30 
  • 60V 35Ah Battery
    → 3A: ~12h
    → 5A: ~7h
    → 10A: ≈ 3h30
• Model compatibility: Teverun Fighter 11, Teverun Fighter 11+
• Compatible battery type: 60 V (16S) lithium-ion batteries
• Cooling: active ventilation – aluminum casing
• Integrated protections: overcharge, overheating, reverse polarity, short circuit

⚠️ Mandatory use of the dual LP16 port extension for 10A mode (Supplied with the charger)

The Teverun Fighter 11 and Fighter 11+ have two LP16 charging ports.

For 10A use, it is imperative to use an LP16 female to 2 LP16 male distribution extension (Supplied with the charger) to distribute the charging current to the two original charging ports.

This configuration limits the current to approximately 5A per connector in order to:

• ✔️ Comply with the manufacturer's specifications for LP16 connectors
• ✔️ Avoid any overheating of the charging sockets
• ✔️ Preserve the original cable sections
• ✔️ Avoid blowing fuses (inexpensive but annoying to change)
• ✔️ Secure ultra-fast charging at 8A to 10A

⚠️ When the charger exceeds 6.5A, it should never be used on a single charging port.

The extension therefore allows for clean and secure distribution of the charging current between the two LP16 ports of the scooter.

🔌 Connection Procedure

1. Connect the 2 male LP16 connectors of the extension to the 2 charging ports of the Teverun Fighter 11 or Fighter 11+
2. Then connect the charger to the LP16 extension
3. Plug the charger into the wall socket
4. Then set the desired charging intensity via the rotary knob

This method helps avoid errors in setting the charging current and thus avoids blowing fuses unnecessarily.

✅ Advantages of the 60V Teverun Fighter 11 Adjustable Charger

✔️ Adjustable from 3A to 10A
✔️ 3A Mode: slow charging, ideal for overnight
✔️ 5A Mode: excellent speed/comfort compromise
✔️ 10A Mode: ultra-fast charging
✔️ Integrated OLED screen
✔️ Intuitive adjustment knob
✔️ Active ventilation greatly limiting heating
✔️ Aluminum heat sink casing
✔️ Much more compact and portable charger than some original fast chargers

Each unit is individually tested before shipment and comes with a 2-year warranty.

ℹ️ Additional Information

This 67.2V – 3A to 10A adjustable charger is perfectly suited for 60V batteries equipping the Teverun Fighter 11 and Fighter 11+.

For ultra-fast charging at 8A to 10A, it is advisable to let the battery cool for about 30 minutes after use before starting to charge.

The active ventilation system maintains a stable temperature even during long fast charging sessions.

❓ FAQ – Teverun Fighter 11 & Fighter 11+ Adjustable Charger

⚡ Is this charger compatible with the Teverun Fighter 11 and Fighter 11+?

Yes ✅, it is designed for 60V (16S lithium-ion) batteries equipping the Teverun Fighter 11 and Fighter 11+.

🔌 Do I have to use both charging ports at 10A?

Yes. Beyond 6.5A, it is imperative to use the 2 charging ports via the LP16 extension to properly distribute the current.

💥 Does 10A mode damage the battery?

No, when the battery is in good condition and the current is correctly distributed across both charging ports using the dual LP16 extension.

🌡 Does the charger get hot?

Very little thanks to the ventilated aluminum casing and active ventilation.

📦 Is the dual LP16 extension included?

Yes, the extension is supplied with the ultra-fast charger for Teverun Fighter 11 and Fighter 11+. It is MANDATORY for any use above 6.5A.

*Non-contractual photos – Source’IT.