Xiaomi 53.2V 2A Charger 4 Ultra and PRO - Xiaomi 5 and 5 PRO - Navee

Xiaomi & Navee 48V (54.6V) Electric Scooter Charger – 2A

This 48V (54.6V) – 2A charger is compatible with a wide range of Xiaomi and Navee scooters equipped with 48V (13S) lithium-ion batteries . It ensures reliable and secure charging while respecting the manufacturer's specifications. The battery label can also indicate a voltage of 53.6V and 100% compatible with this charger.

---

🔧 Technical specifications

• Output Voltage : 54.6V (48V Li-ion battery – 13S) (Compatible with 53.6V battery)
• Charging current : 2A
• Connectivity : Xiaomi and Navee
• Indicative charging time : ~6 h 30 for a 48 V 12.7 Ah battery (example)
• Cooling : Active ventilation – plastic housing
• Built-in protections : overload, short circuit, reverse polarity, overheating
• Standards : CE compliant (electrical safety & EMC)

---

✅ Compatible models (48V / 13S)

• Xiaomi : 4 Pro 2nd generation, 4 Ultra, 5, 5 Pro
• Navee : S65, N65i, S40, S60, ST3 Pro

Tip: Always check the label on the original charger or battery : it should say 54.6V (end of charge voltage) and a 48V (13S) battery.

---

💡 Why choose this Xiaomi / Navee 2A charger?

✔️ Targeted compatibility with Xiaomi & Navee 48V series.
✔️ Standard charge : gentle on the battery, ideal for everyday use.
✔️ Integrated ventilation to limit heating and improve reliability.
✔️ Multiple protections : enhanced security during charging.

---

📦 Warranty & Shipping

Warranty : 2 years – new product, systematically tested before shipping.

Fast shipping : within 24/48 hours throughout France and Europe.

---

🔒 Security & Compliance

The 54.6V voltage and 2A current meet the specifications of Xiaomi & Navee 48V (13S) batteries. Electronic protections (overload, short circuit, overheating, polarity reversal) ensure safe use. CE compliant product.

---

❓ FAQ – Frequently Asked Questions

➡️ How can I be sure that this charger is compatible with my Xiaomi / Navee?

Check 3 points: (1) your battery is 48 V (13S) , (2) the end of charge voltage 54.6V or 53.6V appears on the label of the original charger/battery, (3) the connection corresponds to the model indicated.

➡️ What is the difference between a 42V and 54.6V charger?

A 42V charger is for 36V (10S) batteries. The Xiaomi/Navee listed here use a 48V (13S) battery and require a 54.6V charger.

➡️ Will this 2A charger damage my battery in the long run?

No. 2 A is a standard charge recommended to preserve the life of the cells, if you follow the usage instructions (temperature, suitable connections, no prolonged charging at 100% unnecessarily, etc.).

➡️ My old charger displayed 53.6 V: is this compatible?

There are similar names (53.6 / 54.6 V depending on the marking), the end of charge voltage for a 48 V (13S) battery is 54.6 V. Check the exact reference: if your battery is 48 V (13S), this charger is suitable.

➡️ The charger is different from the original model, is this normal?

Yes. The design may vary, but the technical specifications and 54.6V voltage are in line with Xiaomi and Navee, with the advantage of active ventilation for better heat management.

➡️ How long does it take to charge my Xiaomi / Navee?

For reference: a 12.7 Ah battery recharges in approximately 6.5 hours with a 2 A charger. The time varies depending on the capacity and the initial level.

➡️ Is this charger compatible with third-party (aftermarket) batteries?

Yes, if it is a 48V (13S) battery with a 54.6V end-of-charge voltage and the corresponding connectors. If in doubt, contact us .

➡️ Care & storage tips?

Charge between 10°C and 35°C , avoid humidity, unplug after charging, store the battery around 40–60% if you do not use the scooter for several weeks.

---

📩 Need a compatibility check or technical advice? Write to us at contact@source-it.fr — fast response.

*Non-contractual photos.