Kukirin G3 Pro Chargers – 52V (58.8V) Standard & Fast – 8mm & 3 Pin RCA Connectors Kukirin

Charge your Kukirin G3 Pro electric scooter efficiently with our selection of Source'IT chargers specially designed for 52V – 23.8Ah (14S lithium-ion) batteries. Each model is calibrated at 58.8V for a complete, stable and secure charge, whether you use the 8mm RCA connector or the original Kukirin 3-pin connector .

🔧 Technical Specifications – Kukirin G3 Pro Chargers

• Output voltage: 58.8V (maximum charging voltage for 52V – 14S Li-ion battery)
• Charging current: 2 A (ventilated standard) or 5 A (ventilated fast)
• Available connectors: 8mm RCA or 3-pin Kukirin (original G3 Pro connector)
• Battery compatibility: Kukirin G3 Pro – 52V / 23.8Ah (14S Li-ion)
• Cooling: active ventilation – aluminum heat sink housing
• Protections: overload, overvoltage, overheating, short circuit, polarity reversal
• LED indication: red = charging / green = full charge

🔋 Choose your type of charge

The standard 58.8V – 2A charger provides a gentle charge and will extend the life of your battery. The 58.8V – 5A fast charger cuts charging time by more than half: around 5 hours for a 52V – 23.8Ah battery, compared to more than 10 hours with the original model.

All our chargers are ventilated, individually tested and equipped with a precise calibration at 58.8V to guarantee optimal charging without the risk of overvoltage.

💨 Why choose a Source'IT charger for your Kukirin G3 Pro?

• Perfect Compatibility : Kukirin 8mm and 3-pin RCA connectors
• Faster and more stable charging thanks to the ventilated 5A version
• Active cooling to prevent overheating
• Precise calibration at 58.8V – fully respects 14S lithium-ion cells
• Multiple built-in protections for maximum safety
• Fast shipping within 24/48 hours – French service and technical support

❓ FAQ – Kukirin G3 Pro Chargers (52V / 58.8V)

➡️ What charging voltage does the Kukirin G3 Pro use?

The Kukirin G3 Pro has a 52V (14S Li-ion) battery. It charges to 58.8V with a suitable Source'IT charger.

➡️ What is the difference between Kukirin RCA and 3-pin connectors?

Both are compatible with the Kukirin G3 Pro depending on your scooter version. The 8mm RCA connector is used in some series, while the 3-pin Kukirin connector is used on newer versions.

➡️ What is the difference between the 2A and 5A charger?

The 2A charges more slowly but protects the battery over the long term. The ventilated 5A cuts the charging time in half without the risk of overheating.

➡️ Does the charger get hot during use?

Slight heating is normal. Source'IT chargers incorporate active ventilation to stabilize the temperature.

➡️ Can I use another 52V charger?

Yes, provided it delivers 58.8V output and is equipped with the appropriate connector (8mm RCA or 3-pin Kukirin). If in doubt, contact contact@source-it.fr for a compatibility check.