NAVEE V60i Pro chargers

NAVEE V60i Pro 48V – 54.6V (53.6V) 2A charger with original NAVEE connector

This collection includes the Source’IT NAVEE V60i Pro charger, intended as a replacement for the original charger of the NAVEE V60i Pro electric scooter. Designed for its 48V-class lithium-ion battery, it delivers 2A of current and a regulated voltage adapted to the NAVEE charging system. The original NAVEE connector shown in the photos ensures a direct connection to the scooter's charging port.

This charger is suitable for daily use and allows for faster charging than the original 1.3A charger, while maintaining a stable charge at the end of the cycle. It is supplied with its power cord and checked before shipment from France.

🔌 Compatible model

The charger in this collection is designed for:

• NAVEE V60i Pro
• Battery: lithium-ion 46.8V / 48V class
• Capacity: 10.2Ah – 477.36Wh
• Maximum charging voltage: 54.6V
• Original charger designation: 53.6V

Compatibility is based on the voltage, current, and the original NAVEE connector used by the V60i Pro.

⚡ NAVEE V60i Pro 2A charger

The NAVEE V60i Pro 48V-54.6V (53.6V) 2A charger offers a good balance between speed and daily use. Its 2A current is higher than that of the original 1.3A charger, reducing the scooter's downtime.

• Charging current: 2A
• Approximate charging time: about 5.5 hours from 0 to 100%
• LED indicator: red during charging, green when charging is complete
• Mains power supply: 100-240V AC, 50/60Hz
• Equipment provided: charger and power cord

The charging time remains indicative. It varies according to the initial battery level, its temperature, its condition, and the automatic reduction of current during the final phase.

🔋 Why 48V, 53.6V, and 54.6V?

The 48V label corresponds to the battery voltage class. NAVEE indicates a nominal voltage of 46.8V, a nominal output of 53.6V for the original charger, and a maximum charging voltage of 54.6V. These values describe the same battery system and explain why this charger can be presented under the 48V-54.6V and 53.6V labels.

⚙️ Technical specifications

• Compatibility: NAVEE V60i Pro electric scooter
• Nominal battery voltage: 46.8V / 48V class
• Maximum output voltage: 54.6V DC
• Output current: 2A
• Connectivity: original NAVEE connector
• Integrated protections: overvoltage, overload, overheating, and short-circuit
• Electronic voltage and current regulation
• Charger checked before shipment

🛡️ Why choose a Source’IT charger for the NAVEE V60i Pro?

• Compatibility dedicated to the NAVEE V60i Pro
• Original NAVEE connector visible in the photos
• 2A charging, faster than the original 1.3A charger
• Regulated voltage for the 10.2Ah – 477.36Wh battery
• Integrated electronic protections
• 2-year warranty and shipping from France

❓ FAQ – NAVEE V60i Pro charger

➡️ Which charger should I choose for a NAVEE V60i Pro?
Choose a charger for a 48V battery delivering up to 54.6V, with the original NAVEE connector matching the V60i Pro model. The 2A charger in this collection meets these specifications.

➡️ How long does it take to charge the NAVEE V60i Pro?
A full charge of the 10.2Ah battery takes about 5.5 hours with the 2A charger. A partial charge will naturally be shorter.

➡️ Why does the charger bear the 53.6V and 54.6V labels?
53.6V corresponds to the nominal designation indicated by NAVEE for the original charger, while 54.6V corresponds to the maximum voltage intended for the pack. Both values relate to the 48V battery of the V60i Pro.

➡️ Is the power cable included?
Yes, the NAVEE V60i Pro charger is supplied with its power cord.

📦 Delivery, warranty, and support

• Shipping within 24 to 48 hours from France 🇫🇷
• 2-year warranty
• Charger tested before shipment
• Technical support for compatibility verification

Contact: contact@source-it.fr

Photos non-contractual – Source’IT.