Ninebot C2 PRO chargers

Ninebot C2 PRO 25.2V 2A charger for Segway Ninebot electric scooter

This collection includes the Source’IT Ninebot C2 PRO charger designed to replace the charger for the Segway Ninebot C2 PRO children's electric scooter. Its regulated output of 25.2V and 2A corresponds to the 21.6V 6S lithium-ion battery used by this model. The 5.5 × 2.1 mm jack plug allows you to connect the charger to the C2 PRO's charging port.

The Ninebot C2 PRO charger is suitable for daily charging. It includes an LED indicator, electronic protection features, and a 100-240V universal power supply for easy home use.

🔌 Compatible model

The charger in this collection is intended for the following model:

• Segway Ninebot C2 PRO
• Battery: 21.6V nominal lithium-ion
• Capacity: 5Ah – 108Wh
• Architecture: 6S battery
• Maximum charging voltage: 25.2V
• Connector: 5.5 × 2.1 mm jack plug

⚡ Ninebot C2 PRO 25.2V 2A charger

The Ninebot C2 PRO 25.2V 2A charger delivers a regulated current of 2A to recharge the 5Ah battery. It is suitable for replacing the original charger and helps get the scooter back into service quickly.

• Output voltage: 25.2V DC
• Charging current: 2A
• Approximate charging time: about 3 hours from 0 to 100%
• LED indicator: red during charging, green when charging is complete
• Mains power supply: 100-240V AC, 50/60Hz
• Equipment provided: charger and mains cord

The actual duration depends on the initial level, temperature, and condition of the battery. Electronic management gradually reduces the current during the final charging phase.

🔋 Why a 25.2V output for a 21.6V battery?

The value 21.6V corresponds to the nominal voltage of the Ninebot C2 PRO battery. This battery is composed of six groups of lithium-ion cells connected in series. Once fully charged, its voltage reaches 25.2V. The charger must therefore provide a regulated 25.2V output to allow for a full charge.

⚙️ Technical specifications

• Compatibility: Segway Ninebot C2 PRO
• Battery nominal voltage: 21.6V
• Maximum output voltage: 25.2V DC
• Output current: 2A
• Connection: 5.5 × 2.1 mm jack
• Built-in protections: overvoltage, overcurrent, overheating, and short-circuit
• Electronic voltage and current regulation
• Charger individually tested before shipping

🛡️ Why choose a Source’IT charger for the Ninebot C2 PRO?

• Compatibility dedicated to the Segway Ninebot C2 PRO
• 25.2V voltage adapted to the 21.6V 6S battery
• 2A current adapted to the 5Ah – 108Wh battery
• 5.5 × 2.1 mm jack plug
• Built-in electronic protections
• 2-year warranty and shipping from France

❓ FAQ – Ninebot C2 PRO charger

➡️ Which charger is needed for a Ninebot C2 PRO?
The Ninebot C2 PRO uses a charger delivering 25.2V for its 21.6V battery, with a 5.5 × 2.1 mm jack plug. The 2A model in this collection meets these specifications.

➡️ How long does it take to charge the battery?
A full charge takes about 3 hours with the 2A charger. The time will be shorter if the battery is not completely empty.

➡️ Why shouldn't I use a 42V charger?
The Ninebot C2 PRO runs on a 21.6V battery with a maximum voltage of 25.2V. A charger designed for a 36V battery or one delivering 42V is not compatible.

➡️ Is the mains cord provided?
Yes, the Ninebot C2 PRO charger comes with its mains cord.

📦 Delivery, warranty, and support

• Shipping within 24 to 48 hours from France 🇫🇷
• 2-year warranty
• Charger checked before shipment
• Technical support to verify compatibility

Contact: contact@source-it.fr

Photos are not contractually binding – Source’IT.