SOURCE’IT · CHARGING SPECIALIST

Ausom SR1 Chargers

Find the charger that suits your needs and charging routine.

Chargers for Ausom SR1 52V electric scooterThis collection gathers Source’IT chargers for the Ausom SR1: 2A standard, 4A fast, 5A ultra-fast. Whether you are looking for a replacement charger or faster charging, compare the versions...

Learn more
Stock in FranceSubject to model availability
Delivery in 1 to 10 daysDepending on the delivery method
Flexible payment optionsPay in instalments with Klarna
Technical adviceBy email or phone
Check compatibilityUnsure about the voltage or connector?

3 products

NEED A HAND?

Let us help you choose your charger.

Send us your device model and a photo of the connector. We will help you check voltage and compatibility before you buy.

Check compatibility

Chargers for Ausom SR1 52V electric scooter

This collection gathers Source’IT chargers for the Ausom SR1: 2A standard, 4A fast, 5A ultra-fast. Whether you are looking for a replacement charger or faster charging, compare the versions based on your scooter’s battery and the connector shown in the photos.

The Ausom SR1 is equipped with a 52V 20.8Ah lithium-ion battery. To replace its charger or to have a faster solution, this selection brings together the 2A, 4A, and 5A versions with a regulated 58.8V output.

Batteries and configurations concerned

  • Ausom SR1: 52V 20.8Ah (1081.6Wh) lithium-ion battery.

The batteries in this selection are 52V class, in a 14S lithium-ion architecture. Their maximum charge voltage is 58.8V. The capacity in Ah determines the time required for a full charge: a battery with a higher capacity requires more time with the same charger.

Which charger to choose for the Ausom SR1?

  • 2A standard: suitable for standard charging, as a replacement charger, or as an extra unit for another location. Plastic casing, 58.8V output, and active cooling.
  • 4A fast: a higher current than the 2A version to recover range more quickly in everyday use. Plastic casing, 58.8V output, and active cooling.
  • 5A ultra-fast: the highest current version in this selection, to shorten charging time compared to the 2A and 4A versions. Aluminum casing, 58.8V output, and active cooling.

Estimated charging times by battery and power

Ausom SR1 – 20.8 Ah

  • 2A standard: ≈ 10 h 15
  • 4A fast: ≈ 5 h
  • 5A ultra-fast: ≈ 4 h

These durations are estimates for a 0 to 100% charge with a single charger, calculated by dividing the battery capacity in Ah by the charging current in A, then rounding down to the nearest quarter hour. The starting level, temperature, and battery condition will affect the actual time.

Original connector and compatibility

The products in this collection use the original red 3-pin Ausom connector shown in their photos. The charging voltage and connector must both match your scooter. A 52V battery or a visually similar plug are not, on their own, enough to confirm the wiring.

Choose your version based on the exact model and original battery. Not all Ausom families share the same voltage or connector: the brand page allows you to find the suitable selection.

Active cooling and charger casing

The chargers in this collection are equipped with active cooling that promotes efficient heat dissipation during long charging sessions. The type of casing is detailed on each product sheet: this refers to the charger casing, which is distinct from the scooter's battery casing.

The 2A and 4A versions have a plastic casing; the 5A version has an aluminum casing. All are equipped with active cooling.

FAQ – Choosing an Ausom SR1 charger

Why a 58.8V charger for a 52V battery?

The 52V value refers to the nominal voltage class of the battery. The 58.8V value is its maximum charge voltage in a 14S lithium-ion architecture. The product sheets specify both values to facilitate your choice.

Does a fast charger change the range?

A higher current shortens the charging time. It does not change the Ah capacity of the battery or its range when fully charged; the latter also depends on how the scooter is used.

Do all batteries in the range require the same time?

No. The capacity and chosen current determine the estimated duration. Find your model and its capacity in the charging time list, then consult the sheet for your desired power.

Can I use the charger as a second unit?

Yes, to keep one charger at home and another at a different location. Simultaneous charging with two chargers requires checking the ports and the total current accepted by your configuration.

How to check the plug before purchase?

Compare your scooter's port to the original red 3-pin Ausom connector visible in the photos. If in doubt, our support team can verify your model based on photos and battery information.

Find other Ausom chargers

Consult the collection of chargers for Ausom electric scooters to find other models, voltages, and connectors offered by Source’IT.

Warranty, shipping, and support

  • 2-year warranty on the Source’IT charger.
  • Shipping within 24/48 hours from France.

Need a compatibility check? Email contact@source-it.fr with the exact model, a photo of the charging port, and the battery information.

Non-contractual photos – Source’IT.