Ausom Chargers

Chargers for Ausom electric scooters: choose by model

Find Source’IT chargers for Ausom L1, L1 Max, L2, L2 Max, DT2 Pro, SR1, F1 Max, K20, K20 Pro, Laluz 2, Go Soul 2, and Go Soul 2 Pro electric scooters. This collection gathers replacement solutions and available fast-charging versions, with a selection by model family to help you find the correct voltage and plug.

The range presented covers 48V, 52V, and 60V class batteries. Depending on the family, you can choose a 2A standard, 4A fast, or 5A ultra-fast charger. All chargers in this selection feature Active Cooling. The specifications for each version are detailed on its product page.

Ausom collections by model

Ausom L1 and L1 Max – 48V

The Ausom L1 and L1 Max share a 48V battery voltage, but their capacity differs: the L1 uses 15.6 Ah and the L1 Max 20.8 Ah. This difference affects the charging time without changing the required output voltage of the charger.

Discover Ausom L1 and L1 Max chargers

Ausom L2 and L2 Max – 48V

The Ausom L2 family includes versions with different ranges and battery capacities. The configurations presented here are the L2 in 48V 15.6 Ah and the L2 Max in 48V 20.8 Ah, both charged to a final voltage of 54.6V.

Discover Ausom L2 and L2 Max chargers

Ausom DT2 Pro – 52V

The Ausom DT2 Pro uses a 52V 23.4 Ah lithium-ion battery. Its high capacity is suitable for long rides but requires more charging time with a standard 2A current. The 4A and 5A versions allow you to recover range more quickly between trips.

Discover Ausom DT2 Pro chargers

Ausom SR1 – 52V

The Ausom SR1 is equipped with a 52V 20.8 Ah lithium-ion battery. To replace its charger or to have a faster solution, this selection brings together 2A, 4A, and 5A versions with a regulated 58.8V output.

Discover Ausom SR1 chargers

Ausom F1 Max – 60V

The Ausom F1 Max stands out in this range with its 60V 20.8 Ah lithium-ion battery. It requires a 67.2V charging output: the 54.6V chargers for the L1 and L2 series or the 58.8V chargers for the DT2 Pro and SR1 are not compatible with this configuration.

Discover Ausom F1 Max chargers

Ausom K20 and K20 Pro – 48V

The chargers in this selection are for the Ausom K20 and Laluz 2 in 48V 13.5 Ah, as well as the Ausom K20 Pro in 48V 18 Ah. Their 8 mm RCA connector differs from the 3-pin red connector used on other Ausom families.

Discover Ausom K20 and K20 Pro chargers

Ausom Go Soul 2 and Go Soul 2 Pro – 48V

The Ausom Go Soul 2 uses a 48V 13 Ah battery and the Go Soul 2 Pro a 48V 18 Ah battery. These pages correspond to versions equipped with the Ausom RCA connector shown in the photos, with a final charging voltage of 54.6V.

• Ausom Go Soul 2 and Go Soul 2 Pro 48V Standard Charger – 54.6V 2A
• Ausom Go Soul 2 and Go Soul 2 Pro 48V Fast Charger – 54.6V 4A
• Ausom Go Soul 2 and Go Soul 2 Pro 48V Ultra-Fast Charger – 54.6V 5A

Battery voltage and charger voltage

• 48V Lithium-ion battery (13S): final charging voltage 54.6V.
• 52V Lithium-ion battery (14S): final charging voltage 58.8V.
• 60V Lithium-ion battery (16S): final charging voltage 67.2V.

The nominal battery voltage and the charger output voltage are different. Select your scooter model, then check these values on the product page. A higher power rating does not replace a voltage adapted to the battery.

Standard, fast, or ultra-fast charger?

• 2A standard: for regular charging and as a replacement or additional charger.
• 4A fast: offered for L1, L2, DT2 Pro, SR1, K20, and Go Soul 2 families; reduces waiting time compared to the 2A.
• 5A ultra-fast: the highest current version in this selection, available in the families presented.

The charging current must be read in relation to the battery capacity. For example, a 48V 15.6 Ah battery charges faster than a 48V 20.8 Ah one with the same charger. The collections by model and product pages provide consistent estimates for each power rating, calculated by dividing Ah by A and rounded down to the nearest quarter hour.

Two Ausom connector families

The L1, L2, DT2 Pro, SR1, and F1 Max chargers presented here use the original 3-pin red Ausom connector. The K20, K20 Pro, and Laluz 2 pages use an 8 mm RCA plug; the Go Soul 2 and Go Soul 2 Pro also feature the Ausom RCA connector indicated on their pages. Always compare your version's plug to the product photos.

Casings and Active Cooling

Our Ausom chargers are equipped with active cooling that promotes efficient heat dissipation during long charging sessions. The 48V 2A, 4A, and 5A models are in a plastic casing. For the 52V and 60V families, the 5A is in an aluminum casing; the 2A and 4A versions offered are in plastic.

FAQ – Ausom Chargers

Does a single charger fit all Ausom models?

No. The range includes several battery voltages and connectors. The selection by model helps you find the pages corresponding to your scooter's original configuration.

How to compare charging times?

Open the collection for your model and compare the times associated with its Ah capacity. The estimates cover a single charge from 0 to 100%; the starting level, temperature, and battery condition will cause the actual time to vary.

Can the original charger be replaced?

Source’IT pages specify the model, voltage, connector, and relevant configurations. Use this information and the plug photos to choose the correct version.

How to get help with choosing?

Our support team can examine the exact model, a photo of the plug, and the information on the battery to guide you to the appropriate page.

Warranty, shipping, and support

• 2-year warranty on the Source’IT charger.
• Shipping within 24/48 hours from France.

Need a compatibility check? Email contact@source-it.fr with the exact model, a photo of the charging port, and the battery information.

Photos are not contractually binding – Source’IT.